This is the latest recevied telemetry packets stored in our database for station/object SP7MP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791038063 | 283 Count | 450 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1791036263 | 282 Count | 450 Count | 32 Count | 3.99 VDC | 0 VDC |
| 1791034461 | 281 Count | 450 Count | 32 Count | 3.99 VDC | 0 VDC |
| 1791032660 | 280 Count | 450 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1791030860 | 279 Count | 450 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1791029059 | 278 Count | 450 Count | 32 Count | 3.99 VDC | 0 VDC |
| 1791027258 | 277 Count | 450 Count | 32 Count | 3.99 VDC | 0 VDC |
| 1791025457 | 276 Count | 450 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1791023657 | 270 Count | 445 Count | 27 Count | 3.98 VDC | 0 VDC |
| 1791021856 | 269 Count | 445 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791020055 | 268 Count | 445 Count | 27 Count | 3.98 VDC | 0 VDC |
| 1791018254 | 267 Count | 445 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791016454 | 266 Count | 445 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791014653 | 265 Count | 445 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791012852 | 264 Count | 441 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791011051 | 263 Count | 441 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791009251 | 262 Count | 441 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791007450 | 261 Count | 441 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1791005649 | 260 Count | 441 Count | 27 Count | 3.98 VDC | 0 VDC |
| 1791003848 | 259 Count | 441 Count | 27 Count | 3.98 VDC | 0 VDC |
| 1791002064 | 258 Count | 441 Count | 27 Count | 3.98 VDC | 0 VDC |
| 1791000263 | 257 Count | 439 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1790998462 | 255 Count | 428 Count | 26 Count | 3.98 VDC | 0 VDC |
| 1790996662 | 254 Count | 428 Count | 26 Count | 3.99 VDC | 0 VDC |
| 1790994861 | 253 Count | 428 Count | 26 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)