This is the latest recevied telemetry packets stored in our database for station/object PD1AQM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788098489 | 254 Count | 160 Count | 160 Count | 0 VDC | 0 VDC |
| 1787460607 | 211 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1787458803 | 208 Count | 128 Count | 128 Count | 0 VDC | 0 VDC |
| 1787457000 | 205 Count | 126 Count | 126 Count | 0 VDC | 0 VDC |
| 1787455196 | 202 Count | 124 Count | 124 Count | 0 VDC | 0 VDC |
| 1787453392 | 199 Count | 122 Count | 122 Count | 0 VDC | 0 VDC |
| 1787451589 | 196 Count | 120 Count | 120 Count | 0 VDC | 0 VDC |
| 1787449785 | 193 Count | 118 Count | 118 Count | 0 VDC | 0 VDC |
| 1787447982 | 190 Count | 116 Count | 116 Count | 0 VDC | 0 VDC |
| 1787446178 | 187 Count | 114 Count | 114 Count | 0 VDC | 0 VDC |
| 1787444374 | 184 Count | 112 Count | 112 Count | 0 VDC | 0 VDC |
| 1787442571 | 181 Count | 110 Count | 110 Count | 0 VDC | 0 VDC |
| 1787440767 | 178 Count | 108 Count | 108 Count | 0 VDC | 0 VDC |
| 1787439006 | 176 Count | 107 Count | 107 Count | 0 VDC | 0 VDC |
| 1787437202 | 173 Count | 105 Count | 105 Count | 0 VDC | 0 VDC |
| 1787435399 | 170 Count | 103 Count | 103 Count | 0 VDC | 0 VDC |
| 1787433595 | 168 Count | 102 Count | 102 Count | 0 VDC | 0 VDC |
| 1787431792 | 166 Count | 101 Count | 101 Count | 0 VDC | 0 VDC |
| 1787429988 | 163 Count | 99 Count | 99 Count | 0 VDC | 0 VDC |
| 1787428185 | 160 Count | 97 Count | 97 Count | 0 VDC | 0 VDC |
| 1787426381 | 157 Count | 95 Count | 95 Count | 0 VDC | 0 VDC |
| 1787424577 | 154 Count | 93 Count | 93 Count | 0 VDC | 0 VDC |
| 1787422774 | 151 Count | 91 Count | 91 Count | 0 VDC | 0 VDC |
| 1787420970 | 149 Count | 90 Count | 90 Count | 0 VDC | 0 VDC |
| 1787419167 | 148 Count | 90 Count | 90 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)