This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792527242 | 340 Count | 519 Count | 195 Count | 4.14 VDC | 0 VDC |
| 1792526341 | 334 Count | 509 Count | 190 Count | 4.14 VDC | 0 VDC |
| 1792525440 | 330 Count | 502 Count | 187 Count | 4.14 VDC | 0 VDC |
| 1792524540 | 325 Count | 489 Count | 183 Count | 4.14 VDC | 0 VDC |
| 1792523639 | 319 Count | 480 Count | 178 Count | 4.14 VDC | 0 VDC |
| 1792522738 | 315 Count | 470 Count | 175 Count | 4.13 VDC | 0 VDC |
| 1792521837 | 305 Count | 457 Count | 166 Count | 4.14 VDC | 0 VDC |
| 1792520936 | 294 Count | 441 Count | 156 Count | 4.14 VDC | 0 VDC |
| 1792520035 | 288 Count | 433 Count | 151 Count | 4.14 VDC | 0 VDC |
| 1792519134 | 281 Count | 422 Count | 145 Count | 4.14 VDC | 0 VDC |
| 1792518234 | 276 Count | 411 Count | 141 Count | 4.14 VDC | 0 VDC |
| 1792517333 | 270 Count | 400 Count | 136 Count | 4.14 VDC | 0 VDC |
| 1792516432 | 265 Count | 387 Count | 132 Count | 4.14 VDC | 0 VDC |
| 1792515531 | 258 Count | 375 Count | 126 Count | 4.14 VDC | 0 VDC |
| 1792514650 | 249 Count | 366 Count | 122 Count | 4.14 VDC | 0 VDC |
| 1792513749 | 242 Count | 348 Count | 116 Count | 4.14 VDC | 0 VDC |
| 1792512848 | 236 Count | 331 Count | 111 Count | 4.14 VDC | 0 VDC |
| 1792511947 | 229 Count | 319 Count | 105 Count | 4.14 VDC | 0 VDC |
| 1792511046 | 225 Count | 313 Count | 102 Count | 4.13 VDC | 0 VDC |
| 1792510146 | 218 Count | 290 Count | 96 Count | 4.14 VDC | 0 VDC |
| 1792509245 | 200 Count | 267 Count | 93 Count | 4.14 VDC | 0 VDC |
| 1792508344 | 174 Count | 222 Count | 79 Count | 4.14 VDC | 0 VDC |
| 1792507443 | 143 Count | 160 Count | 57 Count | 4.14 VDC | 0 VDC |
| 1792506542 | 111 Count | 123 Count | 40 Count | 4.14 VDC | 0 VDC |
| 1792505641 | 82 Count | 95 Count | 24 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)