This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794967205 | 384 Count | 993 Count | 322 Count | 4.11 VDC | 0 VDC |
| 1794966303 | 379 Count | 983 Count | 318 Count | 4.12 VDC | 0 VDC |
| 1794965402 | 376 Count | 971 Count | 316 Count | 4.12 VDC | 0 VDC |
| 1794964501 | 370 Count | 958 Count | 311 Count | 4.12 VDC | 0 VDC |
| 1794963600 | 365 Count | 942 Count | 307 Count | 4.12 VDC | 0 VDC |
| 1794962699 | 360 Count | 923 Count | 303 Count | 4.12 VDC | 0 VDC |
| 1794961799 | 357 Count | 910 Count | 301 Count | 4.12 VDC | 0 VDC |
| 1794960897 | 351 Count | 895 Count | 296 Count | 4.12 VDC | 0 VDC |
| 1794959996 | 345 Count | 877 Count | 291 Count | 4.12 VDC | 0 VDC |
| 1794959096 | 339 Count | 861 Count | 286 Count | 4.12 VDC | 0 VDC |
| 1794958195 | 332 Count | 846 Count | 280 Count | 4.11 VDC | 0 VDC |
| 1794957294 | 325 Count | 826 Count | 274 Count | 4.12 VDC | 0 VDC |
| 1794956411 | 319 Count | 808 Count | 269 Count | 4.12 VDC | 0 VDC |
| 1794955492 | 313 Count | 797 Count | 264 Count | 4.12 VDC | 0 VDC |
| 1794954592 | 307 Count | 786 Count | 259 Count | 4.12 VDC | 0 VDC |
| 1794953691 | 300 Count | 773 Count | 253 Count | 4.12 VDC | 0 VDC |
| 1794952790 | 293 Count | 760 Count | 247 Count | 4.12 VDC | 0 VDC |
| 1794951889 | 286 Count | 744 Count | 241 Count | 4.12 VDC | 0 VDC |
| 1794950988 | 282 Count | 737 Count | 238 Count | 4.12 VDC | 0 VDC |
| 1794950088 | 276 Count | 725 Count | 233 Count | 4.12 VDC | 0 VDC |
| 1794949187 | 267 Count | 702 Count | 225 Count | 4.12 VDC | 0 VDC |
| 1794948286 | 261 Count | 685 Count | 220 Count | 4.11 VDC | 0 VDC |
| 1794947385 | 256 Count | 670 Count | 216 Count | 4.12 VDC | 0 VDC |
| 1794946503 | 246 Count | 653 Count | 211 Count | 4.11 VDC | 0 VDC |
| 1794945602 | 239 Count | 636 Count | 205 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)