This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775307594 | 76 Count | 209 Count | 70 Count | 4.11 VDC | 0 VDC |
| 1775306693 | 68 Count | 192 Count | 63 Count | 4.11 VDC | 0 VDC |
| 1775305792 | 58 Count | 161 Count | 54 Count | 4.11 VDC | 0 VDC |
| 1775304891 | 49 Count | 136 Count | 46 Count | 4.11 VDC | 0 VDC |
| 1775303990 | 41 Count | 117 Count | 39 Count | 4.11 VDC | 0 VDC |
| 1775303089 | 29 Count | 77 Count | 28 Count | 4.11 VDC | 0 VDC |
| 1775302189 | 17 Count | 43 Count | 17 Count | 4.12 VDC | 0 VDC |
| 1775301288 | 528 Count | 1006 Count | 464 Count | 4.11 VDC | 0 VDC |
| 1775300387 | 513 Count | 967 Count | 450 Count | 4.11 VDC | 0 VDC |
| 1775299486 | 500 Count | 932 Count | 438 Count | 4.11 VDC | 0 VDC |
| 1775298585 | 493 Count | 918 Count | 432 Count | 4.11 VDC | 0 VDC |
| 1775297684 | 481 Count | 893 Count | 421 Count | 4.11 VDC | 0 VDC |
| 1775296783 | 465 Count | 849 Count | 406 Count | 4.11 VDC | 0 VDC |
| 1775295882 | 454 Count | 826 Count | 396 Count | 4.11 VDC | 0 VDC |
| 1775294982 | 444 Count | 799 Count | 387 Count | 4.11 VDC | 0 VDC |
| 1775294081 | 413 Count | 760 Count | 357 Count | 4.11 VDC | 0 VDC |
| 1775293180 | 406 Count | 749 Count | 351 Count | 4.11 VDC | 0 VDC |
| 1775292279 | 398 Count | 737 Count | 344 Count | 4.11 VDC | 0 VDC |
| 1775291378 | 393 Count | 727 Count | 340 Count | 4.11 VDC | 0 VDC |
| 1775290477 | 381 Count | 709 Count | 329 Count | 4.11 VDC | 0 VDC |
| 1775289597 | 364 Count | 683 Count | 313 Count | 4.11 VDC | 0 VDC |
| 1775288696 | 355 Count | 671 Count | 305 Count | 4.11 VDC | 0 VDC |
| 1775287795 | 348 Count | 657 Count | 299 Count | 4.11 VDC | 0 VDC |
| 1775286894 | 339 Count | 643 Count | 291 Count | 4.11 VDC | 0 VDC |
| 1775285993 | 331 Count | 620 Count | 284 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)