This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783624794 | 162 Count | 388 Count | 152 Count | 4.2 VDC | 0 VDC |
| 1783623893 | 157 Count | 376 Count | 148 Count | 4.2 VDC | 0 VDC |
| 1783622992 | 151 Count | 361 Count | 143 Count | 4.2 VDC | 0 VDC |
| 1783622091 | 117 Count | 310 Count | 110 Count | 4.19 VDC | 0 VDC |
| 1783621190 | 90 Count | 252 Count | 84 Count | 4.19 VDC | 0 VDC |
| 1783620289 | 76 Count | 201 Count | 71 Count | 4.19 VDC | 0 VDC |
| 1783619388 | 70 Count | 173 Count | 66 Count | 4.2 VDC | 0 VDC |
| 1783618488 | 62 Count | 150 Count | 59 Count | 4.2 VDC | 0 VDC |
| 1783617587 | 50 Count | 128 Count | 48 Count | 4.19 VDC | 0 VDC |
| 1783616686 | 22 Count | 70 Count | 21 Count | 4.2 VDC | 0 VDC |
| 1783615785 | 13 Count | 46 Count | 13 Count | 4.19 VDC | 0 VDC |
| 1783614883 | 395 Count | 1041 Count | 360 Count | 4.2 VDC | 0 VDC |
| 1783613983 | 370 Count | 989 Count | 336 Count | 4.19 VDC | 0 VDC |
| 1783613081 | 346 Count | 948 Count | 313 Count | 4.2 VDC | 0 VDC |
| 1783611280 | 303 Count | 844 Count | 272 Count | 4.2 VDC | 0 VDC |
| 1783610379 | 293 Count | 812 Count | 263 Count | 4.2 VDC | 0 VDC |
| 1783609478 | 275 Count | 751 Count | 246 Count | 4.2 VDC | 0 VDC |
| 1783608577 | 254 Count | 689 Count | 226 Count | 4.19 VDC | 0 VDC |
| 1783607676 | 248 Count | 676 Count | 221 Count | 4.2 VDC | 0 VDC |
| 1783606776 | 226 Count | 633 Count | 200 Count | 4.2 VDC | 0 VDC |
| 1783605875 | 215 Count | 608 Count | 190 Count | 4.2 VDC | 0 VDC |
| 1783604974 | 209 Count | 589 Count | 185 Count | 4.2 VDC | 0 VDC |
| 1783604073 | 203 Count | 565 Count | 180 Count | 4.2 VDC | 0 VDC |
| 1783603191 | 195 Count | 548 Count | 177 Count | 4.2 VDC | 0 VDC |
| 1783602291 | 186 Count | 525 Count | 169 Count | 4.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)