This is the latest recevied telemetry packets stored in our database for station/object XE2AD-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792550194 | 29 Count | 38 Count | 20 Count | 0 VDC | 0 VDC |
| 1792548391 | 23 Count | 29 Count | 15 Count | 0 VDC | 0 VDC |
| 1792546588 | 19 Count | 23 Count | 12 Count | 0 VDC | 0 VDC |
| 1792544784 | 15 Count | 17 Count | 9 Count | 0 VDC | 0 VDC |
| 1792542981 | 12 Count | 12 Count | 7 Count | 0 VDC | 0 VDC |
| 1792541215 | 4 Count | 7 Count | 4 Count | 0 VDC | 0 VDC |
| 1792539412 | 973 Count | 1018 Count | 784 Count | 0 VDC | 0 VDC |
| 1792537608 | 951 Count | 990 Count | 763 Count | 0 VDC | 0 VDC |
| 1792535805 | 939 Count | 976 Count | 752 Count | 0 VDC | 0 VDC |
| 1792534002 | 935 Count | 971 Count | 749 Count | 0 VDC | 0 VDC |
| 1792530395 | 915 Count | 947 Count | 731 Count | 0 VDC | 0 VDC |
| 1792526788 | 909 Count | 916 Count | 727 Count | 0 VDC | 0 VDC |
| 1792524985 | 905 Count | 896 Count | 724 Count | 0 VDC | 0 VDC |
| 1792523181 | 899 Count | 872 Count | 719 Count | 0 VDC | 0 VDC |
| 1792516010 | 880 Count | 824 Count | 708 Count | 0 VDC | 0 VDC |
| 1792514207 | 874 Count | 817 Count | 703 Count | 0 VDC | 0 VDC |
| 1792512403 | 869 Count | 810 Count | 699 Count | 0 VDC | 0 VDC |
| 1792510600 | 864 Count | 806 Count | 695 Count | 0 VDC | 0 VDC |
| 1792508797 | 858 Count | 800 Count | 690 Count | 0 VDC | 0 VDC |
| 1792503382 | 809 Count | 748 Count | 644 Count | 0 VDC | 0 VDC |
| 1792501578 | 798 Count | 737 Count | 634 Count | 0 VDC | 0 VDC |
| 1792498011 | 771 Count | 716 Count | 613 Count | 0 VDC | 0 VDC |
| 1792496208 | 767 Count | 712 Count | 610 Count | 0 VDC | 0 VDC |
| 1792494405 | 760 Count | 706 Count | 604 Count | 0 VDC | 0 VDC |
| 1792492601 | 752 Count | 698 Count | 597 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)