This is the latest recevied telemetry packets stored in our database for station/object SP3PSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782052462 | 65 Count | 747 Count | 60 Count | 0 VDC | 0 VDC |
| 1782050661 | 50 Count | 627 Count | 46 Count | 0 VDC | 0 VDC |
| 1782048861 | 39 Count | 533 Count | 36 Count | 0 VDC | 0 VDC |
| 1782047060 | 28 Count | 377 Count | 26 Count | 0 VDC | 0 VDC |
| 1782045259 | 18 Count | 227 Count | 17 Count | 0 VDC | 0 VDC |
| 1782043458 | 7 Count | 96 Count | 7 Count | 0 VDC | 0 VDC |
| 1782041658 | 120 Count | 1039 Count | 104 Count | 0 VDC | 0 VDC |
| 1782039857 | 113 Count | 930 Count | 98 Count | 0 VDC | 0 VDC |
| 1782038056 | 107 Count | 845 Count | 93 Count | 0 VDC | 0 VDC |
| 1782036255 | 94 Count | 779 Count | 81 Count | 0 VDC | 0 VDC |
| 1782034454 | 86 Count | 730 Count | 74 Count | 0 VDC | 0 VDC |
| 1782032662 | 73 Count | 682 Count | 66 Count | 0 VDC | 0 VDC |
| 1782030861 | 68 Count | 641 Count | 62 Count | 0 VDC | 0 VDC |
| 1782029060 | 58 Count | 559 Count | 53 Count | 0 VDC | 0 VDC |
| 1782027260 | 49 Count | 497 Count | 45 Count | 0 VDC | 0 VDC |
| 1782025459 | 40 Count | 386 Count | 37 Count | 0 VDC | 0 VDC |
| 1782023658 | 28 Count | 275 Count | 26 Count | 0 VDC | 0 VDC |
| 1782021857 | 18 Count | 180 Count | 17 Count | 0 VDC | 0 VDC |
| 1782020056 | 9 Count | 85 Count | 9 Count | 0 VDC | 0 VDC |
| 1782018256 | 181 Count | 1049 Count | 154 Count | 0 VDC | 0 VDC |
| 1782016455 | 170 Count | 985 Count | 144 Count | 0 VDC | 0 VDC |
| 1782014654 | 161 Count | 949 Count | 136 Count | 0 VDC | 0 VDC |
| 1782012853 | 153 Count | 917 Count | 129 Count | 0 VDC | 0 VDC |
| 1782011061 | 141 Count | 881 Count | 122 Count | 0 VDC | 0 VDC |
| 1782009260 | 132 Count | 840 Count | 114 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)