This is the latest recevied telemetry packets stored in our database for station/object SP3PSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781391826 | 75 Count | 511 Count | 65 Count | 0 VDC | 0 VDC |
| 1781390026 | 65 Count | 476 Count | 56 Count | 0 VDC | 0 VDC |
| 1781388225 | 55 Count | 442 Count | 47 Count | 0 VDC | 0 VDC |
| 1781386424 | 47 Count | 415 Count | 40 Count | 0 VDC | 0 VDC |
| 1781384632 | 36 Count | 387 Count | 34 Count | 0 VDC | 0 VDC |
| 1781382831 | 25 Count | 287 Count | 24 Count | 0 VDC | 0 VDC |
| 1781381030 | 10 Count | 109 Count | 10 Count | 0 VDC | 0 VDC |
| 1781379229 | 109 Count | 1059 Count | 97 Count | 0 VDC | 0 VDC |
| 1781377428 | 94 Count | 964 Count | 83 Count | 0 VDC | 0 VDC |
| 1781375628 | 85 Count | 895 Count | 75 Count | 0 VDC | 0 VDC |
| 1781373827 | 65 Count | 706 Count | 56 Count | 0 VDC | 0 VDC |
| 1781372026 | 57 Count | 601 Count | 49 Count | 0 VDC | 0 VDC |
| 1781370225 | 45 Count | 474 Count | 38 Count | 0 VDC | 0 VDC |
| 1781368425 | 34 Count | 340 Count | 28 Count | 0 VDC | 0 VDC |
| 1781366624 | 23 Count | 217 Count | 18 Count | 0 VDC | 0 VDC |
| 1781364823 | 16 Count | 77 Count | 12 Count | 0 VDC | 0 VDC |
| 1781363031 | 149 Count | 1113 Count | 143 Count | 0 VDC | 0 VDC |
| 1781361230 | 133 Count | 970 Count | 128 Count | 0 VDC | 0 VDC |
| 1781359429 | 118 Count | 779 Count | 114 Count | 0 VDC | 0 VDC |
| 1781357628 | 66 Count | 526 Count | 63 Count | 0 VDC | 0 VDC |
| 1781355828 | 44 Count | 397 Count | 42 Count | 0 VDC | 0 VDC |
| 1781354027 | 31 Count | 187 Count | 30 Count | 0 VDC | 0 VDC |
| 1781352226 | 22 Count | 138 Count | 22 Count | 0 VDC | 0 VDC |
| 1781350425 | 89 Count | 1124 Count | 81 Count | 0 VDC | 0 VDC |
| 1781348624 | 72 Count | 911 Count | 65 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)