This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782065208 | 706 Count | 755 Count | 670 Count | 4.4 VDC | 0.14 VDC |
| 1782063403 | 689 Count | 737 Count | 654 Count | 4.45 VDC | 0.14 VDC |
| 1782061595 | 667 Count | 716 Count | 633 Count | 4.43 VDC | 0.14 VDC |
| 1782059790 | 644 Count | 694 Count | 611 Count | 4.47 VDC | 0.14 VDC |
| 1782057985 | 621 Count | 671 Count | 589 Count | 4.42 VDC | 0.14 VDC |
| 1782056179 | 599 Count | 650 Count | 568 Count | 4.39 VDC | 0.14 VDC |
| 1782054374 | 578 Count | 630 Count | 548 Count | 4.44 VDC | 0.14 VDC |
| 1782052637 | 559 Count | 611 Count | 530 Count | 4.53 VDC | 0.14 VDC |
| 1782050832 | 538 Count | 591 Count | 510 Count | 4.54 VDC | 0.14 VDC |
| 1782049027 | 505 Count | 556 Count | 478 Count | 4.45 VDC | 0.14 VDC |
| 1782047221 | 492 Count | 542 Count | 466 Count | 4.41 VDC | 0.14 VDC |
| 1782045416 | 479 Count | 522 Count | 454 Count | 4.44 VDC | 0.14 VDC |
| 1782043609 | 447 Count | 487 Count | 423 Count | 4.39 VDC | 0.14 VDC |
| 1782041804 | 416 Count | 453 Count | 393 Count | 4.4 VDC | 0.14 VDC |
| 1782039999 | 397 Count | 435 Count | 375 Count | 4.46 VDC | 0.14 VDC |
| 1782038193 | 385 Count | 424 Count | 364 Count | 4.46 VDC | 0.14 VDC |
| 1782036388 | 369 Count | 407 Count | 349 Count | 4.45 VDC | 0.14 VDC |
| 1782034579 | 353 Count | 387 Count | 334 Count | 4.53 VDC | 0.14 VDC |
| 1782032773 | 332 Count | 366 Count | 314 Count | 4.46 VDC | 0.14 VDC |
| 1782031031 | 321 Count | 355 Count | 304 Count | 4.5 VDC | 0.14 VDC |
| 1782029226 | 300 Count | 334 Count | 284 Count | 4.43 VDC | 0.14 VDC |
| 1782027420 | 283 Count | 313 Count | 268 Count | 4.48 VDC | 0.14 VDC |
| 1782025615 | 262 Count | 293 Count | 248 Count | 4.42 VDC | 0.14 VDC |
| 1782023810 | 244 Count | 274 Count | 231 Count | 4.45 VDC | 0.14 VDC |
| 1782022005 | 230 Count | 261 Count | 218 Count | 4.49 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)