This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791049202 | 35 Count | 38 Count | 34 Count | 4.41 VDC | 0.14 VDC |
| 1791036616 | 858 Count | 890 Count | 777 Count | 4.5 VDC | 0.14 VDC |
| 1791034810 | 841 Count | 870 Count | 761 Count | 4.44 VDC | 0.14 VDC |
| 1791033005 | 825 Count | 853 Count | 746 Count | 4.46 VDC | 0.14 VDC |
| 1791031200 | 806 Count | 834 Count | 728 Count | 4.48 VDC | 0.14 VDC |
| 1791029395 | 791 Count | 815 Count | 714 Count | 4.47 VDC | 0.14 VDC |
| 1791027590 | 772 Count | 796 Count | 696 Count | 4.39 VDC | 0.14 VDC |
| 1791025784 | 752 Count | 776 Count | 678 Count | 4.46 VDC | 0.14 VDC |
| 1791023979 | 728 Count | 749 Count | 655 Count | 4.42 VDC | 0.14 VDC |
| 1791022174 | 715 Count | 736 Count | 643 Count | 4.42 VDC | 0.14 VDC |
| 1791020369 | 696 Count | 715 Count | 625 Count | 4.55 VDC | 0.14 VDC |
| 1791018563 | 677 Count | 696 Count | 607 Count | 4.44 VDC | 0.14 VDC |
| 1791016758 | 656 Count | 673 Count | 587 Count | 4.45 VDC | 0.14 VDC |
| 1791015024 | 639 Count | 654 Count | 571 Count | 4.43 VDC | 0.14 VDC |
| 1790993414 | 600 Count | 624 Count | 544 Count | 4.42 VDC | 0.14 VDC |
| 1790991609 | 599 Count | 624 Count | 544 Count | 4.54 VDC | 0.14 VDC |
| 1790989804 | 598 Count | 624 Count | 544 Count | 4.55 VDC | 0.14 VDC |
| 1790987999 | 597 Count | 624 Count | 544 Count | 4.5 VDC | 0.14 VDC |
| 1790986193 | 596 Count | 624 Count | 544 Count | 4.5 VDC | 0.14 VDC |
| 1790984388 | 595 Count | 624 Count | 544 Count | 4.44 VDC | 0.14 VDC |
| 1790982583 | 594 Count | 624 Count | 544 Count | 4.52 VDC | 0.14 VDC |
| 1790980778 | 593 Count | 624 Count | 544 Count | 4.45 VDC | 0.14 VDC |
| 1790978972 | 592 Count | 624 Count | 544 Count | 4.48 VDC | 0.14 VDC |
| 1790977167 | 591 Count | 624 Count | 544 Count | 4.45 VDC | 0.14 VDC |
| 1790975362 | 590 Count | 624 Count | 544 Count | 4.4 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)