This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775329548 | 359 Count | 746 Count | 263 Count | 4.52 VDC | 0.14 VDC |
| 1775327743 | 356 Count | 740 Count | 261 Count | 4.4 VDC | 0.14 VDC |
| 1775325937 | 353 Count | 733 Count | 259 Count | 4.48 VDC | 0.14 VDC |
| 1775324132 | 352 Count | 731 Count | 259 Count | 4.45 VDC | 0.14 VDC |
| 1775322327 | 349 Count | 725 Count | 257 Count | 4.44 VDC | 0.14 VDC |
| 1775320522 | 347 Count | 719 Count | 256 Count | 4.42 VDC | 0.14 VDC |
| 1775318717 | 344 Count | 712 Count | 254 Count | 4.44 VDC | 0.14 VDC |
| 1775316911 | 343 Count | 708 Count | 254 Count | 4.44 VDC | 0.14 VDC |
| 1775315167 | 339 Count | 702 Count | 251 Count | 4.46 VDC | 0.14 VDC |
| 1775313362 | 336 Count | 695 Count | 249 Count | 4.46 VDC | 0.14 VDC |
| 1775311557 | 332 Count | 688 Count | 246 Count | 4.48 VDC | 0.14 VDC |
| 1775309751 | 330 Count | 682 Count | 245 Count | 4.46 VDC | 0.14 VDC |
| 1775307946 | 328 Count | 678 Count | 244 Count | 4.49 VDC | 0.14 VDC |
| 1775306141 | 323 Count | 667 Count | 240 Count | 4.45 VDC | 0.14 VDC |
| 1775304336 | 320 Count | 661 Count | 238 Count | 4.53 VDC | 0.14 VDC |
| 1775302530 | 317 Count | 655 Count | 236 Count | 4.46 VDC | 0.14 VDC |
| 1775300725 | 314 Count | 645 Count | 234 Count | 4.51 VDC | 0.14 VDC |
| 1775298920 | 310 Count | 637 Count | 231 Count | 4.45 VDC | 0.14 VDC |
| 1775297115 | 306 Count | 622 Count | 228 Count | 4.51 VDC | 0.14 VDC |
| 1775295310 | 302 Count | 616 Count | 225 Count | 4.51 VDC | 0.14 VDC |
| 1775293569 | 297 Count | 606 Count | 221 Count | 4.48 VDC | 0.14 VDC |
| 1775291763 | 295 Count | 601 Count | 220 Count | 4.5 VDC | 0.14 VDC |
| 1775289958 | 292 Count | 594 Count | 218 Count | 4.52 VDC | 0.14 VDC |
| 1775288153 | 288 Count | 569 Count | 215 Count | 4.41 VDC | 0.14 VDC |
| 1775286348 | 266 Count | 539 Count | 194 Count | 4.45 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)