This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782081757 | 165 Count | 218 Count | 145 Count | 4 VDC | 0 VDC |
| 1782080873 | 147 Count | 195 Count | 132 Count | 4.02 VDC | 0 VDC |
| 1782079972 | 139 Count | 184 Count | 125 Count | 4.02 VDC | 0 VDC |
| 1782079072 | 130 Count | 174 Count | 117 Count | 4.01 VDC | 0 VDC |
| 1782078171 | 118 Count | 156 Count | 106 Count | 4.03 VDC | 0 VDC |
| 1782077270 | 109 Count | 143 Count | 98 Count | 4.03 VDC | 0 VDC |
| 1782076369 | 100 Count | 130 Count | 90 Count | 4.03 VDC | 0 VDC |
| 1782075469 | 92 Count | 120 Count | 83 Count | 4.04 VDC | 0 VDC |
| 1782074568 | 82 Count | 107 Count | 74 Count | 4.02 VDC | 0 VDC |
| 1782073667 | 73 Count | 95 Count | 66 Count | 4.02 VDC | 0 VDC |
| 1782072766 | 63 Count | 82 Count | 57 Count | 4.05 VDC | 0 VDC |
| 1782071866 | 55 Count | 72 Count | 50 Count | 4.05 VDC | 0 VDC |
| 1782070965 | 45 Count | 60 Count | 41 Count | 4.06 VDC | 0 VDC |
| 1782070064 | 36 Count | 48 Count | 33 Count | 4.06 VDC | 0 VDC |
| 1782069163 | 26 Count | 35 Count | 24 Count | 4.07 VDC | 0 VDC |
| 1782068263 | 18 Count | 25 Count | 17 Count | 4.07 VDC | 0 VDC |
| 1782067362 | 8 Count | 12 Count | 8 Count | 4.07 VDC | 0 VDC |
| 1782066461 | 566 Count | 1058 Count | 505 Count | 4.08 VDC | 0 VDC |
| 1782065560 | 525 Count | 970 Count | 465 Count | 4.08 VDC | 0 VDC |
| 1782064660 | 517 Count | 927 Count | 458 Count | 4.09 VDC | 0 VDC |
| 1782063759 | 508 Count | 889 Count | 450 Count | 4.09 VDC | 0 VDC |
| 1782062859 | 498 Count | 851 Count | 441 Count | 4.1 VDC | 0 VDC |
| 1782061958 | 488 Count | 828 Count | 432 Count | 4.1 VDC | 0 VDC |
| 1782061057 | 480 Count | 803 Count | 425 Count | 4.11 VDC | 0 VDC |
| 1782060156 | 469 Count | 773 Count | 415 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)