This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787084499 | 44 Count | 979 Count | 3 Count | 3.94 VDC | 0 VDC |
| 1787083598 | 43 Count | 939 Count | 3 Count | 3.94 VDC | 0 VDC |
| 1787082697 | 42 Count | 909 Count | 3 Count | 3.94 VDC | 0 VDC |
| 1787081796 | 41 Count | 871 Count | 3 Count | 3.94 VDC | 0 VDC |
| 1787080895 | 40 Count | 820 Count | 3 Count | 3.95 VDC | 0 VDC |
| 1787079995 | 39 Count | 770 Count | 3 Count | 3.95 VDC | 0 VDC |
| 1787079093 | 38 Count | 720 Count | 3 Count | 3.95 VDC | 0 VDC |
| 1787078193 | 37 Count | 673 Count | 3 Count | 3.95 VDC | 0 VDC |
| 1787077292 | 36 Count | 645 Count | 3 Count | 3.96 VDC | 0 VDC |
| 1787076391 | 35 Count | 616 Count | 3 Count | 3.96 VDC | 0 VDC |
| 1787075490 | 32 Count | 585 Count | 2 Count | 3.97 VDC | 0 VDC |
| 1787074589 | 29 Count | 545 Count | 2 Count | 3.97 VDC | 0 VDC |
| 1787073688 | 28 Count | 501 Count | 2 Count | 3.97 VDC | 0 VDC |
| 1787072787 | 27 Count | 481 Count | 2 Count | 3.98 VDC | 0 VDC |
| 1787071886 | 26 Count | 453 Count | 2 Count | 3.99 VDC | 0 VDC |
| 1787070986 | 24 Count | 433 Count | 2 Count | 4 VDC | 0 VDC |
| 1787070084 | 23 Count | 408 Count | 2 Count | 4 VDC | 0 VDC |
| 1787069184 | 22 Count | 353 Count | 2 Count | 4.01 VDC | 0 VDC |
| 1787068282 | 21 Count | 300 Count | 2 Count | 4 VDC | 0 VDC |
| 1787066502 | 12 Count | 228 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1787065601 | 10 Count | 201 Count | 0 Count | 4 VDC | 0 VDC |
| 1787064700 | 9 Count | 182 Count | 0 Count | 4 VDC | 0 VDC |
| 1787063799 | 8 Count | 173 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1787062898 | 7 Count | 162 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1787061997 | 6 Count | 154 Count | 0 Count | 4.03 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)