This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773473763 | 239 Count | 950 Count | 219 Count | 4.05 VDC | 0 VDC |
| 1773472862 | 225 Count | 884 Count | 206 Count | 4.03 VDC | 0 VDC |
| 1773471962 | 213 Count | 842 Count | 195 Count | 4.02 VDC | 0 VDC |
| 1773471061 | 199 Count | 788 Count | 182 Count | 4 VDC | 0 VDC |
| 1773470160 | 187 Count | 750 Count | 171 Count | 3.99 VDC | 0 VDC |
| 1773469259 | 173 Count | 706 Count | 158 Count | 3.98 VDC | 0 VDC |
| 1773468359 | 160 Count | 660 Count | 146 Count | 3.97 VDC | 0 VDC |
| 1773467458 | 145 Count | 600 Count | 132 Count | 3.97 VDC | 0 VDC |
| 1773466557 | 132 Count | 554 Count | 120 Count | 3.97 VDC | 0 VDC |
| 1773464756 | 103 Count | 439 Count | 93 Count | 3.97 VDC | 0 VDC |
| 1773463855 | 88 Count | 387 Count | 79 Count | 3.97 VDC | 0 VDC |
| 1773462954 | 75 Count | 330 Count | 67 Count | 3.94 VDC | 0 VDC |
| 1773462070 | 58 Count | 271 Count | 55 Count | 3.97 VDC | 0 VDC |
| 1773461169 | 44 Count | 207 Count | 42 Count | 3.97 VDC | 0 VDC |
| 1773460269 | 27 Count | 121 Count | 26 Count | 3.97 VDC | 0 VDC |
| 1773459368 | 13 Count | 59 Count | 13 Count | 3.97 VDC | 0 VDC |
| 1773458467 | 228 Count | 1058 Count | 212 Count | 3.97 VDC | 0 VDC |
| 1773457567 | 213 Count | 1000 Count | 198 Count | 3.98 VDC | 0 VDC |
| 1773456666 | 200 Count | 936 Count | 186 Count | 3.98 VDC | 0 VDC |
| 1773455765 | 186 Count | 870 Count | 173 Count | 3.98 VDC | 0 VDC |
| 1773454864 | 172 Count | 805 Count | 160 Count | 3.98 VDC | 0 VDC |
| 1773453964 | 156 Count | 740 Count | 145 Count | 3.99 VDC | 0 VDC |
| 1773453063 | 143 Count | 677 Count | 133 Count | 3.99 VDC | 0 VDC |
| 1773452162 | 131 Count | 621 Count | 122 Count | 3.99 VDC | 0 VDC |
| 1773451261 | 119 Count | 560 Count | 111 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)