This is the latest recevied telemetry packets stored in our database for station/object SQ3NVZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787153151 | 491 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787151350 | 482 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787149547 | 478 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787147746 | 474 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787145945 | 470 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787144144 | 466 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787142342 | 462 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787140540 | 458 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787138739 | 454 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787136938 | 442 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787135137 | 438 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787133335 | 434 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787131534 | 430 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787129732 | 422 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787127931 | 414 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787126159 | 410 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787124358 | 406 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787122557 | 399 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787120756 | 395 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787118954 | 391 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787117153 | 387 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787115352 | 383 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787113551 | 379 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787111750 | 375 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1787109948 | 371 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)