This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775129892 | 182 Count | 645 Count | 95 Count | 0 VDC | 0.08 VDC |
| 1775128989 | 180 Count | 633 Count | 94 Count | 0 VDC | 0.08 VDC |
| 1775128086 | 178 Count | 625 Count | 93 Count | 0 VDC | 0.08 VDC |
| 1775127183 | 175 Count | 610 Count | 91 Count | 0 VDC | 0.08 VDC |
| 1775126280 | 173 Count | 597 Count | 90 Count | 0 VDC | 0.08 VDC |
| 1775125377 | 172 Count | 591 Count | 90 Count | 0 VDC | 0.08 VDC |
| 1775124474 | 170 Count | 583 Count | 89 Count | 0 VDC | 0.08 VDC |
| 1775123571 | 168 Count | 572 Count | 88 Count | 0 VDC | 0.08 VDC |
| 1775122738 | 161 Count | 563 Count | 86 Count | 0 VDC | 0.08 VDC |
| 1775121835 | 159 Count | 553 Count | 85 Count | 0 VDC | 0.08 VDC |
| 1775120932 | 156 Count | 542 Count | 83 Count | 0 VDC | 0.08 VDC |
| 1775120029 | 154 Count | 537 Count | 82 Count | 0 VDC | 0.08 VDC |
| 1775118223 | 150 Count | 526 Count | 80 Count | 0 VDC | 0.08 VDC |
| 1775117320 | 147 Count | 517 Count | 78 Count | 0 VDC | 0.08 VDC |
| 1775116417 | 144 Count | 506 Count | 76 Count | 0 VDC | 0.08 VDC |
| 1775115514 | 142 Count | 492 Count | 75 Count | 0 VDC | 0.08 VDC |
| 1775114611 | 139 Count | 479 Count | 73 Count | 0 VDC | 0.08 VDC |
| 1775113708 | 136 Count | 468 Count | 71 Count | 0 VDC | 0.08 VDC |
| 1775112805 | 135 Count | 456 Count | 71 Count | 0 VDC | 0.08 VDC |
| 1775111902 | 134 Count | 455 Count | 71 Count | 0 VDC | 0.08 VDC |
| 1775110999 | 131 Count | 446 Count | 69 Count | 0 VDC | 0.08 VDC |
| 1775110096 | 129 Count | 440 Count | 68 Count | 0 VDC | 0.08 VDC |
| 1775109193 | 126 Count | 431 Count | 66 Count | 0 VDC | 0.08 VDC |
| 1775108290 | 123 Count | 424 Count | 64 Count | 0 VDC | 0.08 VDC |
| 1775107387 | 122 Count | 423 Count | 64 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)