This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791015574 | 440 Count | 664 Count | 210 Count | 0 VDC | 0.08 VDC |
| 1791014671 | 438 Count | 661 Count | 209 Count | 0 VDC | 0.08 VDC |
| 1791012935 | 430 Count | 653 Count | 207 Count | 0 VDC | 0.08 VDC |
| 1791004808 | 412 Count | 631 Count | 198 Count | 0 VDC | 0.08 VDC |
| 1791000293 | 402 Count | 618 Count | 193 Count | 0 VDC | 0.08 VDC |
| 1790999390 | 400 Count | 615 Count | 192 Count | 0 VDC | 0.08 VDC |
| 1790998487 | 398 Count | 612 Count | 191 Count | 0 VDC | 0.08 VDC |
| 1790997584 | 397 Count | 611 Count | 191 Count | 0 VDC | 0.08 VDC |
| 1790996681 | 395 Count | 608 Count | 190 Count | 0 VDC | 0.08 VDC |
| 1790995778 | 393 Count | 605 Count | 189 Count | 0 VDC | 0.08 VDC |
| 1790994875 | 391 Count | 602 Count | 188 Count | 0 VDC | 0.08 VDC |
| 1790993973 | 389 Count | 599 Count | 187 Count | 0 VDC | 0.08 VDC |
| 1790993070 | 387 Count | 596 Count | 186 Count | 0 VDC | 0.08 VDC |
| 1790992167 | 385 Count | 593 Count | 185 Count | 0 VDC | 0.08 VDC |
| 1790991333 | 379 Count | 587 Count | 184 Count | 0 VDC | 0.08 VDC |
| 1790990430 | 377 Count | 583 Count | 183 Count | 0 VDC | 0.08 VDC |
| 1790989527 | 375 Count | 581 Count | 182 Count | 0 VDC | 0.08 VDC |
| 1790988625 | 373 Count | 578 Count | 181 Count | 0 VDC | 0.08 VDC |
| 1790987722 | 371 Count | 574 Count | 180 Count | 0 VDC | 0.08 VDC |
| 1790986818 | 369 Count | 570 Count | 179 Count | 0 VDC | 0.08 VDC |
| 1790985916 | 367 Count | 568 Count | 178 Count | 0 VDC | 0.08 VDC |
| 1790985013 | 365 Count | 563 Count | 177 Count | 0 VDC | 0.08 VDC |
| 1790983207 | 361 Count | 555 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1790982304 | 360 Count | 554 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1790977789 | 350 Count | 527 Count | 170 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)