This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775277489 | 270 Count | 907 Count | 130 Count | 0 VDC | 0.08 VDC |
| 1775276586 | 267 Count | 897 Count | 128 Count | 0 VDC | 0.08 VDC |
| 1775275683 | 265 Count | 893 Count | 127 Count | 0 VDC | 0.08 VDC |
| 1775273947 | 258 Count | 889 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1775273044 | 257 Count | 877 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1775272141 | 256 Count | 874 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1775271238 | 255 Count | 871 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1775270335 | 254 Count | 865 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1775269432 | 252 Count | 857 Count | 125 Count | 0 VDC | 0.08 VDC |
| 1775268529 | 250 Count | 849 Count | 124 Count | 0 VDC | 0.08 VDC |
| 1775267626 | 248 Count | 841 Count | 123 Count | 0 VDC | 0.08 VDC |
| 1775266723 | 245 Count | 831 Count | 121 Count | 0 VDC | 0.08 VDC |
| 1775265820 | 243 Count | 829 Count | 120 Count | 0 VDC | 0.08 VDC |
| 1775264917 | 242 Count | 824 Count | 120 Count | 0 VDC | 0.08 VDC |
| 1775264014 | 240 Count | 816 Count | 119 Count | 0 VDC | 0.08 VDC |
| 1775263111 | 237 Count | 805 Count | 117 Count | 0 VDC | 0.08 VDC |
| 1775262209 | 236 Count | 796 Count | 117 Count | 0 VDC | 0.08 VDC |
| 1775261306 | 233 Count | 787 Count | 115 Count | 0 VDC | 0.08 VDC |
| 1775260403 | 232 Count | 786 Count | 115 Count | 0 VDC | 0.08 VDC |
| 1775259500 | 231 Count | 785 Count | 115 Count | 0 VDC | 0.08 VDC |
| 1775258598 | 229 Count | 781 Count | 114 Count | 0 VDC | 0.08 VDC |
| 1775257695 | 226 Count | 774 Count | 112 Count | 0 VDC | 0.08 VDC |
| 1775256791 | 224 Count | 762 Count | 111 Count | 0 VDC | 0.08 VDC |
| 1775255888 | 223 Count | 760 Count | 111 Count | 0 VDC | 0.08 VDC |
| 1775254985 | 220 Count | 749 Count | 109 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)