This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794073718 | 897 Count | 977 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794072815 | 896 Count | 976 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794071913 | 895 Count | 975 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794071010 | 894 Count | 974 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794070107 | 893 Count | 973 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794069204 | 892 Count | 972 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794068301 | 891 Count | 971 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794067398 | 890 Count | 970 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794066495 | 889 Count | 969 Count | 101 Count | 0 VDC | 0.08 VDC |
| 1794065662 | 883 Count | 965 Count | 100 Count | 0 VDC | 0.08 VDC |
| 1794064759 | 881 Count | 963 Count | 99 Count | 0 VDC | 0.08 VDC |
| 1794063856 | 880 Count | 962 Count | 99 Count | 0 VDC | 0.08 VDC |
| 1794062953 | 878 Count | 960 Count | 98 Count | 0 VDC | 0.08 VDC |
| 1794062050 | 877 Count | 959 Count | 98 Count | 0 VDC | 0.08 VDC |
| 1794061147 | 875 Count | 955 Count | 97 Count | 0 VDC | 0.08 VDC |
| 1794060244 | 873 Count | 951 Count | 96 Count | 0 VDC | 0.08 VDC |
| 1794059341 | 872 Count | 950 Count | 96 Count | 0 VDC | 0.08 VDC |
| 1794058438 | 871 Count | 949 Count | 96 Count | 0 VDC | 0.08 VDC |
| 1794057535 | 869 Count | 941 Count | 95 Count | 0 VDC | 0.08 VDC |
| 1794056632 | 868 Count | 940 Count | 95 Count | 0 VDC | 0.08 VDC |
| 1794055729 | 866 Count | 938 Count | 94 Count | 0 VDC | 0.08 VDC |
| 1794054826 | 864 Count | 936 Count | 93 Count | 0 VDC | 0.08 VDC |
| 1794053923 | 862 Count | 934 Count | 92 Count | 0 VDC | 0.08 VDC |
| 1794053020 | 861 Count | 932 Count | 92 Count | 0 VDC | 0.08 VDC |
| 1794052117 | 859 Count | 928 Count | 91 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)