This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792573279 | 37 Count | 203 Count | 36 Count | 0 VDC | 0 VDC |
| 1792571487 | 18 Count | 91 Count | 18 Count | 0 VDC | 0 VDC |
| 1792569677 | 337 Count | 1029 Count | 306 Count | 0 VDC | 0 VDC |
| 1792566075 | 300 Count | 813 Count | 271 Count | 0 VDC | 0 VDC |
| 1792562479 | 250 Count | 613 Count | 227 Count | 0 VDC | 0 VDC |
| 1792560680 | 226 Count | 523 Count | 204 Count | 0 VDC | 0 VDC |
| 1792558879 | 201 Count | 437 Count | 180 Count | 0 VDC | 0 VDC |
| 1792557079 | 190 Count | 416 Count | 170 Count | 0 VDC | 0 VDC |
| 1792555278 | 182 Count | 390 Count | 163 Count | 0 VDC | 0 VDC |
| 1792553477 | 173 Count | 354 Count | 155 Count | 0 VDC | 0 VDC |
| 1792551677 | 161 Count | 332 Count | 144 Count | 0 VDC | 0 VDC |
| 1792549876 | 152 Count | 312 Count | 136 Count | 0 VDC | 0 VDC |
| 1792548075 | 137 Count | 286 Count | 122 Count | 0 VDC | 0 VDC |
| 1792546275 | 126 Count | 266 Count | 112 Count | 0 VDC | 0 VDC |
| 1792544474 | 114 Count | 242 Count | 101 Count | 0 VDC | 0 VDC |
| 1792540879 | 90 Count | 201 Count | 83 Count | 0 VDC | 0 VDC |
| 1792539078 | 79 Count | 183 Count | 73 Count | 0 VDC | 0 VDC |
| 1792537278 | 68 Count | 162 Count | 63 Count | 0 VDC | 0 VDC |
| 1792535476 | 57 Count | 135 Count | 53 Count | 0 VDC | 0 VDC |
| 1792533676 | 46 Count | 111 Count | 43 Count | 0 VDC | 0 VDC |
| 1792531877 | 37 Count | 88 Count | 35 Count | 0 VDC | 0 VDC |
| 1792530076 | 27 Count | 69 Count | 26 Count | 0 VDC | 0 VDC |
| 1792528275 | 15 Count | 33 Count | 15 Count | 0 VDC | 0 VDC |
| 1792526474 | 288 Count | 1001 Count | 248 Count | 0 VDC | 0 VDC |
| 1792524674 | 279 Count | 979 Count | 240 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)