This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794990299 | 179 Count | 458 Count | 161 Count | 0 VDC | 0 VDC |
| 1794988488 | 172 Count | 437 Count | 155 Count | 0 VDC | 0 VDC |
| 1794986688 | 154 Count | 394 Count | 138 Count | 0 VDC | 0 VDC |
| 1794984887 | 143 Count | 368 Count | 128 Count | 0 VDC | 0 VDC |
| 1794983086 | 132 Count | 331 Count | 118 Count | 0 VDC | 0 VDC |
| 1794981286 | 122 Count | 300 Count | 109 Count | 0 VDC | 0 VDC |
| 1794979485 | 109 Count | 267 Count | 97 Count | 0 VDC | 0 VDC |
| 1794977684 | 95 Count | 226 Count | 84 Count | 0 VDC | 0 VDC |
| 1794974090 | 68 Count | 165 Count | 63 Count | 0 VDC | 0 VDC |
| 1794972289 | 56 Count | 139 Count | 52 Count | 0 VDC | 0 VDC |
| 1794970488 | 46 Count | 111 Count | 43 Count | 0 VDC | 0 VDC |
| 1794968688 | 30 Count | 79 Count | 28 Count | 0 VDC | 0 VDC |
| 1794966887 | 20 Count | 53 Count | 19 Count | 0 VDC | 0 VDC |
| 1794965085 | 10 Count | 29 Count | 10 Count | 0 VDC | 0 VDC |
| 1794963286 | 377 Count | 1009 Count | 334 Count | 0 VDC | 0 VDC |
| 1794961485 | 366 Count | 982 Count | 324 Count | 0 VDC | 0 VDC |
| 1794959685 | 355 Count | 953 Count | 314 Count | 0 VDC | 0 VDC |
| 1794957884 | 343 Count | 928 Count | 303 Count | 0 VDC | 0 VDC |
| 1794956083 | 328 Count | 890 Count | 289 Count | 0 VDC | 0 VDC |
| 1794952487 | 301 Count | 826 Count | 268 Count | 0 VDC | 0 VDC |
| 1794950688 | 289 Count | 799 Count | 257 Count | 0 VDC | 0 VDC |
| 1794948886 | 281 Count | 765 Count | 250 Count | 0 VDC | 0 VDC |
| 1794947087 | 268 Count | 737 Count | 238 Count | 0 VDC | 0 VDC |
| 1794945286 | 259 Count | 707 Count | 230 Count | 0 VDC | 0 VDC |
| 1794943485 | 247 Count | 675 Count | 219 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)