This is the latest recevied telemetry packets stored in our database for station/object PA3GPU-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773488495 | 190 Count | 946 Count | 0 Count | 0 VDC | 0 VDC |
| 1773484892 | 189 Count | 944 Count | 0 Count | 0 VDC | 0 VDC |
| 1773477704 | 187 Count | 940 Count | 0 Count | 0 VDC | 0 VDC |
| 1773474101 | 186 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1773470498 | 185 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1773466896 | 184 Count | 929 Count | 0 Count | 0 VDC | 0 VDC |
| 1773463293 | 183 Count | 927 Count | 0 Count | 0 VDC | 0 VDC |
| 1773459690 | 182 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1773456103 | 181 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1773452501 | 180 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1773448898 | 179 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1773445295 | 178 Count | 912 Count | 0 Count | 0 VDC | 0 VDC |
| 1773441692 | 177 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1773434503 | 175 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1773430900 | 174 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1773427297 | 173 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1773423694 | 172 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1773420092 | 171 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1773416489 | 170 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1773412904 | 169 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1773409301 | 168 Count | 886 Count | 0 Count | 0 VDC | 0 VDC |
| 1773405698 | 167 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1773402095 | 166 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1773398492 | 165 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1773394889 | 164 Count | 878 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)