This is the latest recevied telemetry packets stored in our database for station/object HB9IMG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782050893 | 12 Count | 2 Count | 2 Count | 0 VDC | 0 VDC |
| 1782047323 | 4 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782045520 | 3 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782043716 | 2 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782038306 | 1000 Count | 586 Count | 586 Count | 0 VDC | 0 VDC |
| 1782031093 | 988 Count | 578 Count | 578 Count | 0 VDC | 0 VDC |
| 1782027486 | 986 Count | 578 Count | 578 Count | 0 VDC | 0 VDC |
| 1782025721 | 980 Count | 577 Count | 577 Count | 0 VDC | 0 VDC |
| 1782022114 | 975 Count | 574 Count | 574 Count | 0 VDC | 0 VDC |
| 1782020311 | 971 Count | 571 Count | 571 Count | 0 VDC | 0 VDC |
| 1782016704 | 966 Count | 568 Count | 568 Count | 0 VDC | 0 VDC |
| 1782014901 | 963 Count | 566 Count | 566 Count | 0 VDC | 0 VDC |
| 1782013097 | 961 Count | 565 Count | 565 Count | 0 VDC | 0 VDC |
| 1782011294 | 955 Count | 560 Count | 560 Count | 0 VDC | 0 VDC |
| 1782009491 | 953 Count | 559 Count | 559 Count | 0 VDC | 0 VDC |
| 1782007686 | 946 Count | 553 Count | 553 Count | 0 VDC | 0 VDC |
| 1782004117 | 930 Count | 543 Count | 543 Count | 0 VDC | 0 VDC |
| 1782002314 | 928 Count | 542 Count | 542 Count | 0 VDC | 0 VDC |
| 1782000510 | 923 Count | 538 Count | 538 Count | 0 VDC | 0 VDC |
| 1781998707 | 919 Count | 535 Count | 535 Count | 0 VDC | 0 VDC |
| 1781996904 | 916 Count | 533 Count | 533 Count | 0 VDC | 0 VDC |
| 1781995100 | 915 Count | 533 Count | 533 Count | 0 VDC | 0 VDC |
| 1781993297 | 914 Count | 533 Count | 533 Count | 0 VDC | 0 VDC |
| 1781989690 | 910 Count | 531 Count | 531 Count | 0 VDC | 0 VDC |
| 1781987887 | 906 Count | 528 Count | 528 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)