This is the latest recevied telemetry packets stored in our database for station/object MW0KEC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770161170 | 357 Count | 648 Count | 217 Count | 0 VDC | 0 VDC |
| 1770159367 | 352 Count | 641 Count | 213 Count | 0 VDC | 0 VDC |
| 1770157564 | 347 Count | 634 Count | 209 Count | 0 VDC | 0 VDC |
| 1770155761 | 331 Count | 621 Count | 204 Count | 0 VDC | 0 VDC |
| 1770153958 | 326 Count | 606 Count | 200 Count | 0 VDC | 0 VDC |
| 1770152191 | 320 Count | 593 Count | 195 Count | 0 VDC | 0 VDC |
| 1770150387 | 312 Count | 574 Count | 191 Count | 0 VDC | 0 VDC |
| 1770148584 | 306 Count | 559 Count | 186 Count | 0 VDC | 0 VDC |
| 1770146781 | 301 Count | 542 Count | 182 Count | 0 VDC | 0 VDC |
| 1770144978 | 297 Count | 534 Count | 179 Count | 0 VDC | 0 VDC |
| 1770143175 | 291 Count | 517 Count | 174 Count | 0 VDC | 0 VDC |
| 1770141372 | 285 Count | 500 Count | 169 Count | 0 VDC | 0 VDC |
| 1770139569 | 273 Count | 477 Count | 158 Count | 0 VDC | 0 VDC |
| 1770137766 | 269 Count | 471 Count | 155 Count | 0 VDC | 0 VDC |
| 1770135963 | 263 Count | 458 Count | 150 Count | 0 VDC | 0 VDC |
| 1770134159 | 258 Count | 440 Count | 146 Count | 0 VDC | 0 VDC |
| 1770132356 | 253 Count | 427 Count | 142 Count | 0 VDC | 0 VDC |
| 1770130589 | 248 Count | 415 Count | 138 Count | 0 VDC | 0 VDC |
| 1770128786 | 245 Count | 403 Count | 136 Count | 0 VDC | 0 VDC |
| 1770126983 | 239 Count | 387 Count | 131 Count | 0 VDC | 0 VDC |
| 1770125180 | 234 Count | 374 Count | 127 Count | 0 VDC | 0 VDC |
| 1770123377 | 231 Count | 364 Count | 125 Count | 0 VDC | 0 VDC |
| 1770121574 | 224 Count | 347 Count | 119 Count | 0 VDC | 0 VDC |
| 1770119771 | 220 Count | 339 Count | 116 Count | 0 VDC | 0 VDC |
| 1770117968 | 214 Count | 325 Count | 111 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)