This is the latest recevied telemetry packets stored in our database for station/object SP2AJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789368518 | 185 Count | 267 Count | 165 Count | 0 VDC | 0 VDC |
| 1789367617 | 180 Count | 257 Count | 161 Count | 0 VDC | 0 VDC |
| 1789366716 | 174 Count | 249 Count | 156 Count | 0 VDC | 0 VDC |
| 1789365816 | 166 Count | 237 Count | 149 Count | 0 VDC | 0 VDC |
| 1789364915 | 152 Count | 221 Count | 136 Count | 0 VDC | 0 VDC |
| 1789364014 | 148 Count | 214 Count | 133 Count | 0 VDC | 0 VDC |
| 1789363113 | 142 Count | 204 Count | 128 Count | 0 VDC | 0 VDC |
| 1789362230 | 135 Count | 192 Count | 122 Count | 0 VDC | 0 VDC |
| 1789361329 | 119 Count | 172 Count | 107 Count | 0 VDC | 0 VDC |
| 1789360428 | 105 Count | 155 Count | 94 Count | 0 VDC | 0 VDC |
| 1789359527 | 97 Count | 144 Count | 87 Count | 0 VDC | 0 VDC |
| 1789358626 | 84 Count | 128 Count | 75 Count | 0 VDC | 0 VDC |
| 1789357725 | 78 Count | 115 Count | 70 Count | 0 VDC | 0 VDC |
| 1789356824 | 69 Count | 96 Count | 62 Count | 0 VDC | 0 VDC |
| 1789355924 | 57 Count | 82 Count | 51 Count | 0 VDC | 0 VDC |
| 1789355023 | 51 Count | 74 Count | 46 Count | 0 VDC | 0 VDC |
| 1789354122 | 41 Count | 61 Count | 37 Count | 0 VDC | 0 VDC |
| 1789353221 | 36 Count | 52 Count | 33 Count | 0 VDC | 0 VDC |
| 1789352321 | 25 Count | 38 Count | 23 Count | 0 VDC | 0 VDC |
| 1789351420 | 15 Count | 23 Count | 14 Count | 0 VDC | 0 VDC |
| 1789350519 | 4 Count | 9 Count | 4 Count | 0 VDC | 0 VDC |
| 1789349618 | 741 Count | 1010 Count | 648 Count | 0 VDC | 0 VDC |
| 1789348718 | 733 Count | 1000 Count | 641 Count | 0 VDC | 0 VDC |
| 1789347817 | 726 Count | 987 Count | 635 Count | 0 VDC | 0 VDC |
| 1789346916 | 718 Count | 976 Count | 628 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)