This is the latest recevied telemetry packets stored in our database for station/object F4DIW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771007256 | 596 Count | 771 Count | 275 Count | 0.28 VDC | 0 VDC |
| 1771005455 | 595 Count | 769 Count | 275 Count | 0.28 VDC | 0 VDC |
| 1771003654 | 581 Count | 753 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1771001853 | 580 Count | 751 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1771000052 | 579 Count | 749 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770998252 | 578 Count | 748 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770996451 | 577 Count | 747 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770994651 | 576 Count | 745 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770991052 | 574 Count | 742 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770985650 | 571 Count | 735 Count | 262 Count | 0.28 VDC | 0 VDC |
| 1770980249 | 537 Count | 700 Count | 231 Count | 0.28 VDC | 0 VDC |
| 1770978448 | 536 Count | 698 Count | 231 Count | 0.28 VDC | 0 VDC |
| 1770978437 | 536 Count | 699 Count | 231 Count | 0.28 VDC | 0 VDC |
| 1770976637 | 535 Count | 698 Count | 231 Count | 0.28 VDC | 0 VDC |
| 1770974836 | 534 Count | 695 Count | 231 Count | 0.28 VDC | 0 VDC |
| 1770973036 | 523 Count | 683 Count | 221 Count | 0.28 VDC | 0 VDC |
| 1770971235 | 517 Count | 674 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770971227 | 517 Count | 678 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770969427 | 516 Count | 674 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770969419 | 516 Count | 676 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770967618 | 515 Count | 674 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770967609 | 515 Count | 675 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770965808 | 514 Count | 674 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770964008 | 513 Count | 672 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770964000 | 513 Count | 674 Count | 216 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)