This is the latest recevied telemetry packets stored in our database for station/object F4DIW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770960398 | 511 Count | 669 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770958598 | 510 Count | 668 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770956809 | 509 Count | 666 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770955008 | 508 Count | 665 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770953208 | 507 Count | 664 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770951407 | 506 Count | 662 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770949607 | 505 Count | 661 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770947806 | 504 Count | 659 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770946005 | 503 Count | 657 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770944205 | 502 Count | 655 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770942404 | 501 Count | 653 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770940604 | 500 Count | 651 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770938803 | 499 Count | 649 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770937002 | 498 Count | 647 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770935202 | 497 Count | 645 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770933401 | 496 Count | 641 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770931601 | 495 Count | 639 Count | 216 Count | 0.28 VDC | 0 VDC |
| 1770929800 | 480 Count | 619 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770928000 | 479 Count | 617 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770926199 | 478 Count | 616 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770924399 | 477 Count | 614 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770922598 | 476 Count | 613 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770920797 | 475 Count | 611 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770918997 | 474 Count | 609 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1770917196 | 473 Count | 608 Count | 202 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)