This is the latest recevied telemetry packets stored in our database for station/object IU1OPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793308162 | 78 Count | 762 Count | 0 Count | 0 VDC | 0 VDC |
| 1793304559 | 77 Count | 753 Count | 0 Count | 0 VDC | 0 VDC |
| 1793300956 | 76 Count | 745 Count | 0 Count | 0 VDC | 0 VDC |
| 1793297353 | 75 Count | 733 Count | 0 Count | 0 VDC | 0 VDC |
| 1793293750 | 74 Count | 724 Count | 0 Count | 0 VDC | 0 VDC |
| 1793290147 | 73 Count | 713 Count | 0 Count | 0 VDC | 0 VDC |
| 1793286544 | 72 Count | 705 Count | 0 Count | 0 VDC | 0 VDC |
| 1793282941 | 71 Count | 696 Count | 0 Count | 0 VDC | 0 VDC |
| 1793279338 | 70 Count | 688 Count | 0 Count | 0 VDC | 0 VDC |
| 1793275735 | 69 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1793272132 | 68 Count | 679 Count | 0 Count | 0 VDC | 0 VDC |
| 1793268529 | 67 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1793264926 | 66 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1793261324 | 65 Count | 657 Count | 0 Count | 0 VDC | 0 VDC |
| 1793257721 | 64 Count | 653 Count | 0 Count | 0 VDC | 0 VDC |
| 1793254118 | 63 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1793250587 | 62 Count | 637 Count | 0 Count | 0 VDC | 0 VDC |
| 1793246984 | 61 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1793243381 | 60 Count | 618 Count | 0 Count | 0 VDC | 0 VDC |
| 1793239778 | 59 Count | 608 Count | 0 Count | 0 VDC | 0 VDC |
| 1793236175 | 58 Count | 595 Count | 0 Count | 0 VDC | 0 VDC |
| 1793232572 | 57 Count | 583 Count | 0 Count | 0 VDC | 0 VDC |
| 1793228969 | 56 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1793225366 | 55 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1793221763 | 54 Count | 552 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)