This is the latest recevied telemetry packets stored in our database for station/object IU5MGF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776480345 | 982 Count | 515 Count | 32 Count | 4.23 VDC | 0 VDC |
| 1776478537 | 979 Count | 514 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776476730 | 977 Count | 513 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776474922 | 975 Count | 513 Count | 31 Count | 4.2 VDC | 0 VDC |
| 1776473115 | 973 Count | 513 Count | 31 Count | 4.16 VDC | 0 VDC |
| 1776471307 | 971 Count | 513 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776469500 | 969 Count | 513 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776467692 | 967 Count | 513 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776465885 | 965 Count | 513 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776464077 | 963 Count | 513 Count | 31 Count | 4.22 VDC | 0 VDC |
| 1776462270 | 961 Count | 512 Count | 31 Count | 4.24 VDC | 0 VDC |
| 1776460462 | 959 Count | 512 Count | 31 Count | 4.24 VDC | 0 VDC |
| 1776458655 | 957 Count | 512 Count | 31 Count | 4.24 VDC | 0 VDC |
| 1776455040 | 953 Count | 512 Count | 31 Count | 4.25 VDC | 0 VDC |
| 1776453232 | 951 Count | 512 Count | 31 Count | 4.25 VDC | 0 VDC |
| 1776451425 | 949 Count | 498 Count | 31 Count | 4.26 VDC | 0 VDC |
| 1776449617 | 947 Count | 498 Count | 31 Count | 4.23 VDC | 0 VDC |
| 1776447810 | 945 Count | 498 Count | 31 Count | 4.26 VDC | 0 VDC |
| 1776446003 | 943 Count | 497 Count | 31 Count | 4.27 VDC | 0 VDC |
| 1776444195 | 941 Count | 497 Count | 31 Count | 4.28 VDC | 0 VDC |
| 1776442388 | 939 Count | 490 Count | 31 Count | 4.29 VDC | 0 VDC |
| 1776440580 | 937 Count | 490 Count | 31 Count | 4.33 VDC | 0 VDC |
| 1776438772 | 935 Count | 490 Count | 31 Count | 4.33 VDC | 0 VDC |
| 1776436965 | 933 Count | 490 Count | 31 Count | 4.33 VDC | 0 VDC |
| 1776435157 | 931 Count | 490 Count | 31 Count | 4.32 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)