This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775141805 | 154 Count | 314 Count | 122 Count | 0 VDC | 0 VDC |
| 1775140004 | 148 Count | 296 Count | 117 Count | 0 VDC | 0 VDC |
| 1775129208 | 109 Count | 220 Count | 88 Count | 0 VDC | 0 VDC |
| 1775123805 | 91 Count | 188 Count | 73 Count | 0 VDC | 0 VDC |
| 1775122005 | 85 Count | 176 Count | 68 Count | 0 VDC | 0 VDC |
| 1775116602 | 68 Count | 131 Count | 54 Count | 0 VDC | 0 VDC |
| 1775113001 | 56 Count | 100 Count | 44 Count | 0 VDC | 0 VDC |
| 1775100403 | 11 Count | 25 Count | 10 Count | 0 VDC | 0 VDC |
| 1775096802 | 432 Count | 1018 Count | 328 Count | 0 VDC | 0 VDC |
| 1775093203 | 421 Count | 987 Count | 319 Count | 0 VDC | 0 VDC |
| 1775091402 | 416 Count | 972 Count | 315 Count | 0 VDC | 0 VDC |
| 1775087806 | 400 Count | 942 Count | 305 Count | 0 VDC | 0 VDC |
| 1775086005 | 394 Count | 929 Count | 300 Count | 0 VDC | 0 VDC |
| 1775084205 | 388 Count | 916 Count | 295 Count | 0 VDC | 0 VDC |
| 1775082404 | 382 Count | 906 Count | 290 Count | 0 VDC | 0 VDC |
| 1775077002 | 369 Count | 879 Count | 280 Count | 0 VDC | 0 VDC |
| 1775062604 | 333 Count | 804 Count | 256 Count | 0 VDC | 0 VDC |
| 1775060803 | 327 Count | 787 Count | 251 Count | 0 VDC | 0 VDC |
| 1775042804 | 267 Count | 599 Count | 205 Count | 0 VDC | 0 VDC |
| 1775041003 | 261 Count | 581 Count | 200 Count | 0 VDC | 0 VDC |
| 1775039202 | 255 Count | 566 Count | 195 Count | 0 VDC | 0 VDC |
| 1775035600 | 243 Count | 535 Count | 185 Count | 0 VDC | 0 VDC |
| 1775028397 | 220 Count | 487 Count | 166 Count | 0 VDC | 0 VDC |
| 1775026597 | 214 Count | 475 Count | 161 Count | 0 VDC | 0 VDC |
| 1775023003 | 198 Count | 444 Count | 151 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)