This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779661828 | 15 Count | 90 Count | 14 Count | 0 VDC | 0 VDC |
| 1779660030 | 8 Count | 46 Count | 8 Count | 0 VDC | 0 VDC |
| 1779658227 | 317 Count | 1019 Count | 254 Count | 0 VDC | 0 VDC |
| 1779656426 | 309 Count | 1000 Count | 247 Count | 0 VDC | 0 VDC |
| 1779652825 | 292 Count | 970 Count | 232 Count | 0 VDC | 0 VDC |
| 1779651024 | 284 Count | 952 Count | 225 Count | 0 VDC | 0 VDC |
| 1779649223 | 277 Count | 933 Count | 219 Count | 0 VDC | 0 VDC |
| 1779645630 | 258 Count | 882 Count | 206 Count | 0 VDC | 0 VDC |
| 1779643829 | 250 Count | 869 Count | 199 Count | 0 VDC | 0 VDC |
| 1779638427 | 223 Count | 787 Count | 175 Count | 0 VDC | 0 VDC |
| 1779636626 | 220 Count | 780 Count | 173 Count | 0 VDC | 0 VDC |
| 1779631224 | 197 Count | 740 Count | 153 Count | 0 VDC | 0 VDC |
| 1779624029 | 166 Count | 668 Count | 130 Count | 0 VDC | 0 VDC |
| 1779622228 | 161 Count | 645 Count | 126 Count | 0 VDC | 0 VDC |
| 1779620427 | 154 Count | 627 Count | 120 Count | 0 VDC | 0 VDC |
| 1779616825 | 142 Count | 606 Count | 110 Count | 0 VDC | 0 VDC |
| 1779611423 | 133 Count | 579 Count | 104 Count | 0 VDC | 0 VDC |
| 1779609622 | 129 Count | 571 Count | 101 Count | 0 VDC | 0 VDC |
| 1779607822 | 124 Count | 554 Count | 97 Count | 0 VDC | 0 VDC |
| 1779606021 | 119 Count | 538 Count | 93 Count | 0 VDC | 0 VDC |
| 1779602427 | 102 Count | 506 Count | 82 Count | 0 VDC | 0 VDC |
| 1779600627 | 95 Count | 449 Count | 76 Count | 0 VDC | 0 VDC |
| 1779598826 | 90 Count | 385 Count | 72 Count | 0 VDC | 0 VDC |
| 1779597027 | 84 Count | 344 Count | 67 Count | 0 VDC | 0 VDC |
| 1779595224 | 78 Count | 308 Count | 62 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)