This is the latest recevied telemetry packets stored in our database for station/object SP3KAU-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775181784 | 400 Count | 731 Count | 127 Count | 0 VDC | 0 VDC |
| 1775181482 | 399 Count | 730 Count | 127 Count | 0 VDC | 0 VDC |
| 1775181181 | 397 Count | 729 Count | 127 Count | 0 VDC | 0 VDC |
| 1775180880 | 395 Count | 728 Count | 126 Count | 0 VDC | 0 VDC |
| 1775179687 | 394 Count | 728 Count | 126 Count | 0 VDC | 0 VDC |
| 1775179385 | 392 Count | 726 Count | 126 Count | 0 VDC | 0 VDC |
| 1775179084 | 390 Count | 725 Count | 125 Count | 0 VDC | 0 VDC |
| 1775120470 | 365 Count | 615 Count | 101 Count | 0 VDC | 0 VDC |
| 1775120168 | 364 Count | 612 Count | 101 Count | 0 VDC | 0 VDC |
| 1775119867 | 362 Count | 611 Count | 101 Count | 0 VDC | 0 VDC |
| 1775119566 | 360 Count | 608 Count | 100 Count | 0 VDC | 0 VDC |
| 1775119264 | 358 Count | 605 Count | 100 Count | 0 VDC | 0 VDC |
| 1775097301 | 260 Count | 372 Count | 74 Count | 0 VDC | 0 VDC |
| 1775096817 | 259 Count | 372 Count | 74 Count | 0 VDC | 0 VDC |
| 1775096516 | 257 Count | 370 Count | 74 Count | 0 VDC | 0 VDC |
| 1775096214 | 254 Count | 365 Count | 72 Count | 0 VDC | 0 VDC |
| 1775095913 | 252 Count | 363 Count | 72 Count | 0 VDC | 0 VDC |
| 1775095612 | 251 Count | 361 Count | 72 Count | 0 VDC | 0 VDC |
| 1775095310 | 248 Count | 359 Count | 71 Count | 0 VDC | 0 VDC |
| 1775095008 | 247 Count | 355 Count | 71 Count | 0 VDC | 0 VDC |
| 1775094707 | 245 Count | 354 Count | 71 Count | 0 VDC | 0 VDC |
| 1775094406 | 244 Count | 352 Count | 71 Count | 0 VDC | 0 VDC |
| 1775094105 | 242 Count | 351 Count | 71 Count | 0 VDC | 0 VDC |
| 1775086696 | 241 Count | 351 Count | 71 Count | 0 VDC | 0 VDC |
| 1775086394 | 238 Count | 347 Count | 70 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)