This is the latest recevied telemetry packets stored in our database for station/object SP3KAU-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774248246 | 314 Count | 892 Count | 117 Count | 0 VDC | 0 VDC |
| 1774247944 | 313 Count | 891 Count | 117 Count | 0 VDC | 0 VDC |
| 1774247639 | 311 Count | 890 Count | 117 Count | 0 VDC | 0 VDC |
| 1774247337 | 310 Count | 890 Count | 117 Count | 0 VDC | 0 VDC |
| 1774247036 | 308 Count | 890 Count | 117 Count | 0 VDC | 0 VDC |
| 1774246735 | 307 Count | 890 Count | 117 Count | 0 VDC | 0 VDC |
| 1774246433 | 305 Count | 889 Count | 117 Count | 0 VDC | 0 VDC |
| 1774246132 | 304 Count | 879 Count | 117 Count | 0 VDC | 0 VDC |
| 1774245830 | 301 Count | 876 Count | 116 Count | 0 VDC | 0 VDC |
| 1774245528 | 300 Count | 871 Count | 116 Count | 0 VDC | 0 VDC |
| 1774245227 | 298 Count | 865 Count | 116 Count | 0 VDC | 0 VDC |
| 1774244926 | 296 Count | 860 Count | 115 Count | 0 VDC | 0 VDC |
| 1774244624 | 294 Count | 858 Count | 115 Count | 0 VDC | 0 VDC |
| 1774244323 | 293 Count | 854 Count | 115 Count | 0 VDC | 0 VDC |
| 1774219009 | 272 Count | 725 Count | 95 Count | 0 VDC | 0 VDC |
| 1774218707 | 270 Count | 725 Count | 95 Count | 0 VDC | 0 VDC |
| 1774218406 | 269 Count | 722 Count | 95 Count | 0 VDC | 0 VDC |
| 1774218105 | 267 Count | 720 Count | 95 Count | 0 VDC | 0 VDC |
| 1774217804 | 265 Count | 719 Count | 94 Count | 0 VDC | 0 VDC |
| 1774217502 | 263 Count | 717 Count | 94 Count | 0 VDC | 0 VDC |
| 1774217205 | 262 Count | 713 Count | 94 Count | 0 VDC | 0 VDC |
| 1774216900 | 259 Count | 712 Count | 93 Count | 0 VDC | 0 VDC |
| 1774216615 | 258 Count | 711 Count | 93 Count | 0 VDC | 0 VDC |
| 1774216302 | 256 Count | 711 Count | 93 Count | 0 VDC | 0 VDC |
| 1774215993 | 254 Count | 709 Count | 92 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)