This is the latest recevied telemetry packets stored in our database for station/object SP8C-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791566233 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1791564433 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1791562633 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1791560833 | 0 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1791559032 | 0 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1791557232 | 0 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1791555431 | 0 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
| 1791553631 | 0 Count | 845 Count | 0 Count | 0 VDC | 0 VDC |
| 1791551831 | 0 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1791550031 | 0 Count | 841 Count | 0 Count | 0 VDC | 0 VDC |
| 1791548231 | 0 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
| 1791546431 | 0 Count | 837 Count | 0 Count | 0 VDC | 0 VDC |
| 1791544631 | 0 Count | 835 Count | 0 Count | 0 VDC | 0 VDC |
| 1791542831 | 0 Count | 833 Count | 0 Count | 0 VDC | 0 VDC |
| 1791541031 | 0 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1791539231 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1791537431 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1791535631 | 0 Count | 825 Count | 0 Count | 0 VDC | 0 VDC |
| 1791512232 | 0 Count | 761 Count | 0 Count | 0 VDC | 0 VDC |
| 1791510432 | 0 Count | 759 Count | 0 Count | 0 VDC | 0 VDC |
| 1791508632 | 0 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
| 1791506832 | 0 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1791505032 | 0 Count | 753 Count | 0 Count | 0 VDC | 0 VDC |
| 1791503232 | 0 Count | 751 Count | 0 Count | 0 VDC | 0 VDC |
| 1791501432 | 0 Count | 749 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)