This is the latest recevied telemetry packets stored in our database for station/object SP2SGL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765988601 | 88 Count | 305 Count | 79 Count | 0 VDC | 0 VDC |
| 1765986800 | 57 Count | 262 Count | 49 Count | 0 VDC | 0 VDC |
| 1765983745 | 17 Count | 160 Count | 15 Count | 0 VDC | 0 VDC |
| 1765981944 | 11 Count | 105 Count | 10 Count | 0 VDC | 0 VDC |
| 1765980144 | 5 Count | 49 Count | 5 Count | 0 VDC | 0 VDC |
| 1765978343 | 153 Count | 1014 Count | 135 Count | 0 VDC | 0 VDC |
| 1765976542 | 147 Count | 967 Count | 130 Count | 0 VDC | 0 VDC |
| 1765974741 | 140 Count | 919 Count | 125 Count | 0 VDC | 0 VDC |
| 1765969830 | 115 Count | 745 Count | 104 Count | 0 VDC | 0 VDC |
| 1765968029 | 106 Count | 684 Count | 96 Count | 0 VDC | 0 VDC |
| 1765966236 | 96 Count | 626 Count | 87 Count | 0 VDC | 0 VDC |
| 1765964436 | 90 Count | 564 Count | 82 Count | 0 VDC | 0 VDC |
| 1765962635 | 81 Count | 519 Count | 74 Count | 0 VDC | 0 VDC |
| 1765960834 | 70 Count | 461 Count | 64 Count | 0 VDC | 0 VDC |
| 1765959033 | 62 Count | 410 Count | 57 Count | 0 VDC | 0 VDC |
| 1765957233 | 44 Count | 274 Count | 40 Count | 0 VDC | 0 VDC |
| 1765955433 | 32 Count | 206 Count | 29 Count | 0 VDC | 0 VDC |
| 1765953631 | 25 Count | 163 Count | 23 Count | 0 VDC | 0 VDC |
| 1765951830 | 17 Count | 91 Count | 16 Count | 0 VDC | 0 VDC |
| 1765950030 | 6 Count | 31 Count | 6 Count | 0 VDC | 0 VDC |
| 1765948229 | 225 Count | 1017 Count | 174 Count | 0 VDC | 0 VDC |
| 1765946428 | 218 Count | 978 Count | 168 Count | 0 VDC | 0 VDC |
| 1765944636 | 212 Count | 944 Count | 163 Count | 0 VDC | 0 VDC |
| 1765942835 | 207 Count | 907 Count | 159 Count | 0 VDC | 0 VDC |
| 1765941034 | 200 Count | 872 Count | 153 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)