This is the latest recevied telemetry packets stored in our database for station/object SP7TBU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789367179 | 11 Count | 66 Count | 9 Count | 0 VDC | 0 VDC |
| 1789365978 | 189 Count | 1002 Count | 155 Count | 0 VDC | 0 VDC |
| 1789364777 | 179 Count | 918 Count | 147 Count | 0 VDC | 0 VDC |
| 1789363576 | 162 Count | 820 Count | 133 Count | 0 VDC | 0 VDC |
| 1789362375 | 149 Count | 713 Count | 121 Count | 0 VDC | 0 VDC |
| 1789361174 | 125 Count | 555 Count | 101 Count | 0 VDC | 0 VDC |
| 1789359973 | 114 Count | 476 Count | 92 Count | 0 VDC | 0 VDC |
| 1789358771 | 103 Count | 429 Count | 83 Count | 0 VDC | 0 VDC |
| 1789357570 | 89 Count | 385 Count | 73 Count | 0 VDC | 0 VDC |
| 1789356370 | 79 Count | 324 Count | 65 Count | 0 VDC | 0 VDC |
| 1789355168 | 69 Count | 286 Count | 57 Count | 0 VDC | 0 VDC |
| 1789353967 | 58 Count | 241 Count | 48 Count | 0 VDC | 0 VDC |
| 1789352766 | 47 Count | 189 Count | 40 Count | 0 VDC | 0 VDC |
| 1789351565 | 38 Count | 143 Count | 32 Count | 0 VDC | 0 VDC |
| 1789350365 | 27 Count | 107 Count | 24 Count | 0 VDC | 0 VDC |
| 1789349164 | 10 Count | 51 Count | 10 Count | 0 VDC | 0 VDC |
| 1789347963 | 213 Count | 1066 Count | 177 Count | 0 VDC | 0 VDC |
| 1789346762 | 200 Count | 988 Count | 167 Count | 0 VDC | 0 VDC |
| 1789345576 | 188 Count | 910 Count | 157 Count | 0 VDC | 0 VDC |
| 1789344375 | 176 Count | 852 Count | 148 Count | 0 VDC | 0 VDC |
| 1789343174 | 163 Count | 791 Count | 137 Count | 0 VDC | 0 VDC |
| 1789341974 | 149 Count | 735 Count | 126 Count | 0 VDC | 0 VDC |
| 1789340773 | 134 Count | 676 Count | 116 Count | 0 VDC | 0 VDC |
| 1789339572 | 114 Count | 596 Count | 98 Count | 0 VDC | 0 VDC |
| 1789338371 | 93 Count | 517 Count | 79 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)