This is the latest recevied telemetry packets stored in our database for station/object OK1UXX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779651427 | 324 Count | 191 Count | 116 Count | 4.29 VDC | 0 VDC |
| 1779650220 | 312 Count | 181 Count | 106 Count | 4.24 VDC | 0 VDC |
| 1779649617 | 309 Count | 178 Count | 104 Count | 4.23 VDC | 0 VDC |
| 1779649014 | 306 Count | 176 Count | 102 Count | 4.29 VDC | 0 VDC |
| 1779648411 | 304 Count | 175 Count | 101 Count | 4.28 VDC | 0 VDC |
| 1779647808 | 303 Count | 174 Count | 101 Count | 4.28 VDC | 0 VDC |
| 1779647204 | 301 Count | 173 Count | 100 Count | 4.23 VDC | 0 VDC |
| 1779646601 | 299 Count | 172 Count | 99 Count | 4.26 VDC | 0 VDC |
| 1779645998 | 298 Count | 171 Count | 99 Count | 4.24 VDC | 0 VDC |
| 1779645395 | 296 Count | 170 Count | 98 Count | 4.3 VDC | 0 VDC |
| 1779644791 | 294 Count | 169 Count | 97 Count | 4.27 VDC | 0 VDC |
| 1779644188 | 293 Count | 168 Count | 97 Count | 4.29 VDC | 0 VDC |
| 1779643585 | 291 Count | 167 Count | 96 Count | 4.25 VDC | 0 VDC |
| 1779642378 | 288 Count | 165 Count | 95 Count | 4.29 VDC | 0 VDC |
| 1779641775 | 286 Count | 164 Count | 94 Count | 4.27 VDC | 0 VDC |
| 1779641171 | 284 Count | 162 Count | 93 Count | 4.32 VDC | 0 VDC |
| 1779640687 | 283 Count | 161 Count | 93 Count | 4.31 VDC | 0 VDC |
| 1779640083 | 281 Count | 160 Count | 92 Count | 4.29 VDC | 0 VDC |
| 1779639480 | 280 Count | 160 Count | 92 Count | 4.21 VDC | 0 VDC |
| 1779638877 | 278 Count | 158 Count | 91 Count | 4.26 VDC | 0 VDC |
| 1779638273 | 276 Count | 157 Count | 90 Count | 4.24 VDC | 0 VDC |
| 1779637670 | 275 Count | 157 Count | 90 Count | 4.24 VDC | 0 VDC |
| 1779637067 | 273 Count | 155 Count | 89 Count | 4.26 VDC | 0 VDC |
| 1779636463 | 271 Count | 154 Count | 88 Count | 4.28 VDC | 0 VDC |
| 1779635860 | 270 Count | 154 Count | 88 Count | 4.31 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)