This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792554318 | 532 Count | 598 Count | 467 Count | 4.29 VDC | 0.14 VDC |
| 1792552515 | 528 Count | 595 Count | 464 Count | 4.26 VDC | 0.14 VDC |
| 1792550711 | 523 Count | 591 Count | 460 Count | 4.25 VDC | 0.14 VDC |
| 1792548983 | 514 Count | 586 Count | 456 Count | 4.27 VDC | 0.14 VDC |
| 1792547179 | 509 Count | 581 Count | 452 Count | 4.28 VDC | 0.14 VDC |
| 1792545376 | 459 Count | 502 Count | 403 Count | 4.29 VDC | 0.14 VDC |
| 1792543573 | 424 Count | 446 Count | 369 Count | 4.27 VDC | 0.14 VDC |
| 1792541770 | 400 Count | 407 Count | 346 Count | 4.28 VDC | 0.14 VDC |
| 1792539966 | 395 Count | 403 Count | 342 Count | 4.26 VDC | 0.14 VDC |
| 1792538163 | 390 Count | 399 Count | 338 Count | 4.3 VDC | 0.14 VDC |
| 1792536360 | 376 Count | 385 Count | 325 Count | 4.26 VDC | 0.14 VDC |
| 1792534557 | 339 Count | 339 Count | 289 Count | 4.25 VDC | 0.14 VDC |
| 1792532754 | 334 Count | 333 Count | 285 Count | 4.29 VDC | 0.14 VDC |
| 1792530950 | 327 Count | 326 Count | 279 Count | 4.25 VDC | 0.14 VDC |
| 1792529148 | 280 Count | 272 Count | 233 Count | 4.26 VDC | 0.14 VDC |
| 1792527344 | 267 Count | 260 Count | 221 Count | 4.24 VDC | 0.14 VDC |
| 1792525541 | 264 Count | 258 Count | 219 Count | 4.24 VDC | 0.14 VDC |
| 1792523737 | 261 Count | 256 Count | 217 Count | 4.29 VDC | 0.14 VDC |
| 1792521934 | 258 Count | 254 Count | 215 Count | 4.29 VDC | 0.14 VDC |
| 1792520131 | 255 Count | 252 Count | 213 Count | 4.27 VDC | 0.14 VDC |
| 1792518328 | 252 Count | 250 Count | 211 Count | 4.23 VDC | 0.14 VDC |
| 1792516525 | 249 Count | 248 Count | 209 Count | 4.25 VDC | 0.14 VDC |
| 1792514721 | 246 Count | 246 Count | 207 Count | 4.27 VDC | 0.14 VDC |
| 1792512918 | 243 Count | 244 Count | 205 Count | 4.25 VDC | 0.14 VDC |
| 1792511115 | 240 Count | 242 Count | 203 Count | 4.27 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)