This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794952117 | 465 Count | 474 Count | 400 Count | 4.23 VDC | 0.14 VDC |
| 1794950314 | 457 Count | 465 Count | 393 Count | 4.26 VDC | 0.14 VDC |
| 1794948510 | 450 Count | 458 Count | 387 Count | 4.26 VDC | 0.14 VDC |
| 1794946707 | 440 Count | 446 Count | 378 Count | 4.28 VDC | 0.14 VDC |
| 1794944901 | 433 Count | 438 Count | 372 Count | 4.28 VDC | 0.14 VDC |
| 1794943097 | 429 Count | 434 Count | 369 Count | 4.29 VDC | 0.14 VDC |
| 1794941294 | 423 Count | 427 Count | 364 Count | 4.3 VDC | 0.14 VDC |
| 1794939491 | 418 Count | 422 Count | 360 Count | 4.26 VDC | 0.14 VDC |
| 1794937688 | 413 Count | 417 Count | 356 Count | 4.27 VDC | 0.14 VDC |
| 1794935885 | 407 Count | 412 Count | 351 Count | 4.25 VDC | 0.14 VDC |
| 1794934081 | 401 Count | 407 Count | 346 Count | 4.27 VDC | 0.14 VDC |
| 1794930475 | 392 Count | 399 Count | 339 Count | 4.29 VDC | 0.14 VDC |
| 1794928672 | 386 Count | 394 Count | 334 Count | 4.26 VDC | 0.14 VDC |
| 1794926869 | 377 Count | 384 Count | 326 Count | 4.28 VDC | 0.14 VDC |
| 1794925140 | 364 Count | 374 Count | 318 Count | 4.23 VDC | 0.14 VDC |
| 1794923336 | 355 Count | 366 Count | 310 Count | 4.26 VDC | 0.14 VDC |
| 1794921533 | 351 Count | 363 Count | 307 Count | 4.23 VDC | 0.14 VDC |
| 1794919730 | 344 Count | 355 Count | 301 Count | 4.26 VDC | 0.14 VDC |
| 1794917927 | 339 Count | 351 Count | 297 Count | 4.24 VDC | 0.14 VDC |
| 1794916124 | 332 Count | 343 Count | 291 Count | 4.23 VDC | 0.14 VDC |
| 1794914320 | 322 Count | 332 Count | 282 Count | 4.25 VDC | 0.14 VDC |
| 1794912517 | 316 Count | 325 Count | 277 Count | 4.25 VDC | 0.14 VDC |
| 1794910714 | 312 Count | 322 Count | 274 Count | 4.28 VDC | 0.14 VDC |
| 1794908911 | 306 Count | 317 Count | 269 Count | 4.29 VDC | 0.14 VDC |
| 1794907107 | 300 Count | 312 Count | 264 Count | 4.27 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)