This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793333772 | 874 Count | 1000 Count | 772 Count | 4.25 VDC | 0.14 VDC |
| 1793331969 | 865 Count | 992 Count | 764 Count | 4.26 VDC | 0.14 VDC |
| 1793330166 | 856 Count | 984 Count | 756 Count | 4.29 VDC | 0.14 VDC |
| 1793328362 | 847 Count | 974 Count | 748 Count | 4.24 VDC | 0.14 VDC |
| 1793326633 | 835 Count | 964 Count | 741 Count | 4.28 VDC | 0.14 VDC |
| 1793324830 | 809 Count | 937 Count | 716 Count | 4.29 VDC | 0.14 VDC |
| 1793323028 | 802 Count | 929 Count | 710 Count | 4.28 VDC | 0.14 VDC |
| 1793321224 | 785 Count | 911 Count | 694 Count | 4.29 VDC | 0.14 VDC |
| 1793317617 | 723 Count | 811 Count | 634 Count | 4.26 VDC | 0.14 VDC |
| 1793315814 | 715 Count | 800 Count | 627 Count | 4.29 VDC | 0.14 VDC |
| 1793314011 | 707 Count | 791 Count | 620 Count | 4.3 VDC | 0.14 VDC |
| 1793312208 | 700 Count | 783 Count | 614 Count | 4.28 VDC | 0.14 VDC |
| 1793310404 | 693 Count | 772 Count | 608 Count | 4.29 VDC | 0.14 VDC |
| 1793308601 | 686 Count | 766 Count | 602 Count | 4.26 VDC | 0.14 VDC |
| 1793304995 | 619 Count | 678 Count | 537 Count | 4.23 VDC | 0.14 VDC |
| 1793303192 | 616 Count | 676 Count | 535 Count | 4.25 VDC | 0.14 VDC |
| 1793301388 | 612 Count | 673 Count | 532 Count | 4.24 VDC | 0.14 VDC |
| 1793299585 | 607 Count | 669 Count | 528 Count | 4.29 VDC | 0.14 VDC |
| 1793297782 | 602 Count | 665 Count | 524 Count | 4.28 VDC | 0.14 VDC |
| 1793295979 | 599 Count | 663 Count | 522 Count | 4.29 VDC | 0.14 VDC |
| 1793294176 | 595 Count | 660 Count | 519 Count | 4.26 VDC | 0.14 VDC |
| 1793292372 | 591 Count | 657 Count | 516 Count | 4.26 VDC | 0.14 VDC |
| 1793290569 | 588 Count | 655 Count | 514 Count | 4.26 VDC | 0.14 VDC |
| 1793288766 | 583 Count | 651 Count | 510 Count | 4.27 VDC | 0.14 VDC |
| 1793286963 | 579 Count | 648 Count | 507 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)