This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771008234 | 367 Count | 745 Count | 91 Count | 0 VDC | 0 VDC |
| 1771002824 | 360 Count | 727 Count | 87 Count | 0 VDC | 0 VDC |
| 1771001032 | 355 Count | 702 Count | 83 Count | 0 VDC | 0 VDC |
| 1770995610 | 318 Count | 632 Count | 49 Count | 0 VDC | 0 VDC |
| 1770990200 | 315 Count | 606 Count | 49 Count | 0 VDC | 0 VDC |
| 1770986631 | 309 Count | 589 Count | 49 Count | 0 VDC | 0 VDC |
| 1770981221 | 306 Count | 578 Count | 49 Count | 0 VDC | 0 VDC |
| 1770975811 | 302 Count | 563 Count | 48 Count | 0 VDC | 0 VDC |
| 1770974008 | 301 Count | 561 Count | 48 Count | 0 VDC | 0 VDC |
| 1770923083 | 291 Count | 537 Count | 47 Count | 0 VDC | 0 VDC |
| 1770919476 | 289 Count | 523 Count | 47 Count | 0 VDC | 0 VDC |
| 1770917672 | 288 Count | 514 Count | 47 Count | 0 VDC | 0 VDC |
| 1770915869 | 287 Count | 508 Count | 47 Count | 0 VDC | 0 VDC |
| 1770914066 | 286 Count | 502 Count | 47 Count | 0 VDC | 0 VDC |
| 1770908656 | 281 Count | 476 Count | 45 Count | 0 VDC | 0 VDC |
| 1770905049 | 278 Count | 461 Count | 44 Count | 0 VDC | 0 VDC |
| 1770901480 | 272 Count | 446 Count | 44 Count | 0 VDC | 0 VDC |
| 1770899677 | 271 Count | 437 Count | 44 Count | 0 VDC | 0 VDC |
| 1770896071 | 269 Count | 424 Count | 44 Count | 0 VDC | 0 VDC |
| 1770894267 | 268 Count | 416 Count | 44 Count | 0 VDC | 0 VDC |
| 1770815978 | 241 Count | 345 Count | 34 Count | 0 VDC | 0 VDC |
| 1770814174 | 240 Count | 336 Count | 34 Count | 0 VDC | 0 VDC |
| 1770812371 | 239 Count | 327 Count | 34 Count | 0 VDC | 0 VDC |
| 1770810567 | 238 Count | 319 Count | 34 Count | 0 VDC | 0 VDC |
| 1770808764 | 237 Count | 310 Count | 34 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)