This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770230631 | 92 Count | 167 Count | 73 Count | 0 VDC | 0 VDC |
| 1770228827 | 91 Count | 161 Count | 73 Count | 0 VDC | 0 VDC |
| 1770227024 | 90 Count | 156 Count | 73 Count | 0 VDC | 0 VDC |
| 1770225221 | 89 Count | 151 Count | 73 Count | 0 VDC | 0 VDC |
| 1770223417 | 67 Count | 127 Count | 52 Count | 0 VDC | 0 VDC |
| 1770218005 | 40 Count | 81 Count | 28 Count | 0 VDC | 0 VDC |
| 1770214398 | 30 Count | 64 Count | 20 Count | 0 VDC | 0 VDC |
| 1770207224 | 7 Count | 24 Count | 5 Count | 0 VDC | 0 VDC |
| 1770201812 | 549 Count | 1002 Count | 310 Count | 0 VDC | 0 VDC |
| 1770198205 | 541 Count | 989 Count | 304 Count | 0 VDC | 0 VDC |
| 1770196402 | 536 Count | 979 Count | 300 Count | 0 VDC | 0 VDC |
| 1770142388 | 517 Count | 955 Count | 289 Count | 0 VDC | 0 VDC |
| 1770138782 | 515 Count | 949 Count | 289 Count | 0 VDC | 0 VDC |
| 1770136978 | 514 Count | 945 Count | 289 Count | 0 VDC | 0 VDC |
| 1770133372 | 512 Count | 939 Count | 289 Count | 0 VDC | 0 VDC |
| 1770131568 | 511 Count | 935 Count | 289 Count | 0 VDC | 0 VDC |
| 1770129765 | 510 Count | 932 Count | 289 Count | 0 VDC | 0 VDC |
| 1770127961 | 509 Count | 929 Count | 289 Count | 0 VDC | 0 VDC |
| 1770124355 | 507 Count | 923 Count | 289 Count | 0 VDC | 0 VDC |
| 1770122551 | 506 Count | 920 Count | 289 Count | 0 VDC | 0 VDC |
| 1770120786 | 501 Count | 917 Count | 289 Count | 0 VDC | 0 VDC |
| 1770118982 | 500 Count | 913 Count | 289 Count | 0 VDC | 0 VDC |
| 1770117179 | 499 Count | 908 Count | 289 Count | 0 VDC | 0 VDC |
| 1770115376 | 498 Count | 904 Count | 289 Count | 0 VDC | 0 VDC |
| 1770113572 | 497 Count | 900 Count | 289 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)