This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770178476 | 756 Count | 285 Count | 146 Count | 4.25 VDC | 0.14 VDC |
| 1770176670 | 755 Count | 285 Count | 146 Count | 4.24 VDC | 0.14 VDC |
| 1770174865 | 754 Count | 285 Count | 146 Count | 4.25 VDC | 0.14 VDC |
| 1770173060 | 753 Count | 285 Count | 146 Count | 4.24 VDC | 0.14 VDC |
| 1770171317 | 752 Count | 285 Count | 146 Count | 4.23 VDC | 0.14 VDC |
| 1770169512 | 751 Count | 285 Count | 146 Count | 4.26 VDC | 0.14 VDC |
| 1770167707 | 750 Count | 285 Count | 146 Count | 4.21 VDC | 0.14 VDC |
| 1770165901 | 749 Count | 285 Count | 146 Count | 4.2 VDC | 0.14 VDC |
| 1770164096 | 748 Count | 285 Count | 146 Count | 4.25 VDC | 0.14 VDC |
| 1770162291 | 747 Count | 285 Count | 146 Count | 4.21 VDC | 0.14 VDC |
| 1770149717 | 740 Count | 285 Count | 146 Count | 4.24 VDC | 0.14 VDC |
| 1770147912 | 739 Count | 285 Count | 146 Count | 4.24 VDC | 0.14 VDC |
| 1770146106 | 738 Count | 285 Count | 146 Count | 4.2 VDC | 0.14 VDC |
| 1770144301 | 737 Count | 285 Count | 146 Count | 4.22 VDC | 0.14 VDC |
| 1770142496 | 736 Count | 285 Count | 146 Count | 4.21 VDC | 0.14 VDC |
| 1770140690 | 735 Count | 285 Count | 146 Count | 4.26 VDC | 0.14 VDC |
| 1770138885 | 734 Count | 285 Count | 146 Count | 4.22 VDC | 0.14 VDC |
| 1770137080 | 733 Count | 285 Count | 146 Count | 4.21 VDC | 0.14 VDC |
| 1770135274 | 732 Count | 285 Count | 146 Count | 4.25 VDC | 0.14 VDC |
| 1770133469 | 729 Count | 283 Count | 144 Count | 4.22 VDC | 0.14 VDC |
| 1770131664 | 721 Count | 277 Count | 138 Count | 4.23 VDC | 0.14 VDC |
| 1770129859 | 719 Count | 276 Count | 137 Count | 4.23 VDC | 0.14 VDC |
| 1770128116 | 718 Count | 276 Count | 137 Count | 4.2 VDC | 0.14 VDC |
| 1770126310 | 717 Count | 276 Count | 137 Count | 4.23 VDC | 0.14 VDC |
| 1770124505 | 716 Count | 276 Count | 137 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)