This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791027436 | 997 Count | 891 Count | 776 Count | 3.89 VDC | 0.14 VDC |
| 1791023831 | 996 Count | 891 Count | 776 Count | 3.87 VDC | 0.14 VDC |
| 1791020225 | 994 Count | 890 Count | 775 Count | 3.83 VDC | 0.14 VDC |
| 1791016620 | 989 Count | 886 Count | 771 Count | 3.79 VDC | 0.14 VDC |
| 1791013015 | 984 Count | 882 Count | 767 Count | 3.73 VDC | 0.14 VDC |
| 1791009410 | 979 Count | 877 Count | 763 Count | 3.72 VDC | 0.14 VDC |
| 1791005835 | 962 Count | 861 Count | 747 Count | 3.72 VDC | 0.14 VDC |
| 1791002229 | 928 Count | 828 Count | 714 Count | 3.72 VDC | 0.14 VDC |
| 1790998624 | 921 Count | 822 Count | 708 Count | 3.73 VDC | 0.14 VDC |
| 1790995019 | 916 Count | 818 Count | 704 Count | 3.73 VDC | 0.14 VDC |
| 1790991414 | 911 Count | 814 Count | 700 Count | 3.73 VDC | 0.14 VDC |
| 1790987809 | 906 Count | 810 Count | 696 Count | 3.74 VDC | 0.14 VDC |
| 1790984236 | 901 Count | 806 Count | 692 Count | 3.74 VDC | 0.14 VDC |
| 1790980631 | 896 Count | 802 Count | 688 Count | 3.74 VDC | 0.14 VDC |
| 1790977026 | 891 Count | 798 Count | 684 Count | 3.75 VDC | 0.14 VDC |
| 1790973420 | 881 Count | 789 Count | 675 Count | 3.76 VDC | 0.14 VDC |
| 1790969815 | 879 Count | 787 Count | 674 Count | 3.76 VDC | 0.14 VDC |
| 1790966210 | 871 Count | 780 Count | 667 Count | 3.78 VDC | 0.14 VDC |
| 1790962634 | 868 Count | 778 Count | 665 Count | 3.79 VDC | 0.14 VDC |
| 1790959028 | 867 Count | 778 Count | 665 Count | 3.81 VDC | 0.14 VDC |
| 1790955423 | 866 Count | 778 Count | 665 Count | 3.82 VDC | 0.14 VDC |
| 1790951818 | 865 Count | 778 Count | 665 Count | 3.84 VDC | 0.14 VDC |
| 1790948212 | 857 Count | 771 Count | 658 Count | 3.85 VDC | 0.14 VDC |
| 1790944607 | 825 Count | 737 Count | 627 Count | 3.86 VDC | 0.14 VDC |
| 1790941032 | 822 Count | 735 Count | 625 Count | 3.84 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)