This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775295587 | 636 Count | 202 Count | 198 Count | 3.35 VDC | 0.14 VDC |
| 1775293308 | 635 Count | 202 Count | 198 Count | 3.37 VDC | 0.14 VDC |
| 1775283674 | 634 Count | 202 Count | 198 Count | 3.35 VDC | 0.14 VDC |
| 1775261091 | 633 Count | 202 Count | 198 Count | 3.4 VDC | 0.14 VDC |
| 1775259468 | 632 Count | 202 Count | 198 Count | 3.4 VDC | 0.14 VDC |
| 1775258542 | 631 Count | 202 Count | 198 Count | 3.4 VDC | 0.14 VDC |
| 1775257270 | 630 Count | 202 Count | 198 Count | 3.39 VDC | 0.14 VDC |
| 1775255727 | 629 Count | 202 Count | 198 Count | 3.4 VDC | 0.14 VDC |
| 1775252122 | 628 Count | 202 Count | 198 Count | 3.43 VDC | 0.14 VDC |
| 1775248517 | 623 Count | 198 Count | 194 Count | 3.45 VDC | 0.14 VDC |
| 1775244911 | 617 Count | 193 Count | 189 Count | 3.45 VDC | 0.14 VDC |
| 1775241336 | 616 Count | 193 Count | 189 Count | 3.49 VDC | 0.14 VDC |
| 1775237731 | 615 Count | 193 Count | 189 Count | 3.5 VDC | 0.14 VDC |
| 1775234125 | 611 Count | 190 Count | 186 Count | 3.5 VDC | 0.14 VDC |
| 1775230520 | 608 Count | 188 Count | 184 Count | 3.51 VDC | 0.14 VDC |
| 1775226915 | 607 Count | 188 Count | 184 Count | 3.51 VDC | 0.14 VDC |
| 1775223310 | 606 Count | 188 Count | 184 Count | 3.52 VDC | 0.14 VDC |
| 1775219735 | 605 Count | 188 Count | 184 Count | 3.53 VDC | 0.14 VDC |
| 1775216130 | 604 Count | 188 Count | 184 Count | 3.52 VDC | 0.14 VDC |
| 1775212524 | 603 Count | 188 Count | 184 Count | 3.51 VDC | 0.14 VDC |
| 1775208919 | 602 Count | 188 Count | 184 Count | 3.46 VDC | 0.14 VDC |
| 1775205314 | 598 Count | 185 Count | 181 Count | 3.45 VDC | 0.14 VDC |
| 1775191370 | 594 Count | 184 Count | 180 Count | 3.33 VDC | 0.14 VDC |
| 1775187765 | 591 Count | 182 Count | 178 Count | 3.37 VDC | 0.14 VDC |
| 1775184160 | 590 Count | 182 Count | 178 Count | 3.4 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)