This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789385696 | 759 Count | 924 Count | 295 Count | 3.74 VDC | 0.14 VDC |
| 1789382091 | 758 Count | 924 Count | 295 Count | 3.7 VDC | 0.14 VDC |
| 1789378486 | 757 Count | 924 Count | 295 Count | 3.74 VDC | 0.14 VDC |
| 1789374881 | 756 Count | 924 Count | 295 Count | 3.65 VDC | 0.14 VDC |
| 1789371275 | 750 Count | 919 Count | 290 Count | 3.7 VDC | 0.14 VDC |
| 1789367670 | 747 Count | 917 Count | 288 Count | 3.68 VDC | 0.14 VDC |
| 1789364094 | 722 Count | 893 Count | 264 Count | 3.67 VDC | 0.14 VDC |
| 1789360489 | 695 Count | 866 Count | 238 Count | 3.67 VDC | 0.14 VDC |
| 1789356884 | 694 Count | 866 Count | 238 Count | 3.68 VDC | 0.14 VDC |
| 1789353279 | 693 Count | 866 Count | 238 Count | 3.68 VDC | 0.14 VDC |
| 1789349674 | 692 Count | 866 Count | 238 Count | 3.68 VDC | 0.14 VDC |
| 1789346068 | 691 Count | 866 Count | 238 Count | 3.68 VDC | 0.14 VDC |
| 1789342494 | 690 Count | 866 Count | 238 Count | 3.67 VDC | 0.14 VDC |
| 1789338889 | 689 Count | 866 Count | 238 Count | 3.68 VDC | 0.14 VDC |
| 1789335284 | 688 Count | 866 Count | 238 Count | 3.67 VDC | 0.14 VDC |
| 1789331678 | 687 Count | 866 Count | 238 Count | 3.69 VDC | 0.14 VDC |
| 1789328073 | 686 Count | 866 Count | 238 Count | 3.66 VDC | 0.14 VDC |
| 1789324468 | 685 Count | 866 Count | 238 Count | 3.7 VDC | 0.14 VDC |
| 1789320895 | 684 Count | 866 Count | 238 Count | 3.7 VDC | 0.14 VDC |
| 1789317288 | 683 Count | 866 Count | 238 Count | 3.71 VDC | 0.14 VDC |
| 1789313683 | 663 Count | 847 Count | 219 Count | 3.71 VDC | 0.14 VDC |
| 1789310078 | 659 Count | 844 Count | 216 Count | 3.72 VDC | 0.14 VDC |
| 1789306473 | 658 Count | 844 Count | 216 Count | 3.72 VDC | 0.14 VDC |
| 1789302867 | 657 Count | 844 Count | 216 Count | 3.72 VDC | 0.14 VDC |
| 1789299291 | 656 Count | 844 Count | 216 Count | 3.72 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)