This is the latest recevied telemetry packets stored in our database for station/object EA4IAX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775138531 | 111 Count | 743 Count | 0 Count | 0 VDC | 0 VDC |
| 1775134928 | 106 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1775131325 | 101 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1775127722 | 91 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1775124119 | 82 Count | 598 Count | 0 Count | 0 VDC | 0 VDC |
| 1775120516 | 72 Count | 562 Count | 0 Count | 0 VDC | 0 VDC |
| 1775116913 | 67 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1775113311 | 62 Count | 479 Count | 0 Count | 0 VDC | 0 VDC |
| 1775109708 | 58 Count | 437 Count | 0 Count | 0 VDC | 0 VDC |
| 1775106105 | 54 Count | 402 Count | 0 Count | 0 VDC | 0 VDC |
| 1775102502 | 49 Count | 371 Count | 0 Count | 0 VDC | 0 VDC |
| 1775098899 | 44 Count | 334 Count | 0 Count | 0 VDC | 0 VDC |
| 1775095330 | 39 Count | 300 Count | 0 Count | 0 VDC | 0 VDC |
| 1775088125 | 29 Count | 230 Count | 0 Count | 0 VDC | 0 VDC |
| 1775084522 | 24 Count | 188 Count | 0 Count | 0 VDC | 0 VDC |
| 1775080919 | 19 Count | 144 Count | 0 Count | 0 VDC | 0 VDC |
| 1775077316 | 14 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
| 1775073712 | 9 Count | 82 Count | 0 Count | 0 VDC | 0 VDC |
| 1775070110 | 4 Count | 52 Count | 0 Count | 0 VDC | 0 VDC |
| 1775066507 | 150 Count | 1024 Count | 0 Count | 0 VDC | 0 VDC |
| 1775062904 | 145 Count | 987 Count | 0 Count | 0 VDC | 0 VDC |
| 1775059301 | 140 Count | 953 Count | 0 Count | 0 VDC | 0 VDC |
| 1775055698 | 135 Count | 913 Count | 0 Count | 0 VDC | 0 VDC |
| 1775052130 | 130 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1775048527 | 125 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)