This is the latest recevied telemetry packets stored in our database for station/object SN2DP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765572708 | 359 Count | 364 Count | 227 Count | 0 VDC | 0 VDC |
| 1765571807 | 356 Count | 362 Count | 225 Count | 0 VDC | 0 VDC |
| 1765570906 | 352 Count | 358 Count | 222 Count | 0 VDC | 0 VDC |
| 1765570006 | 349 Count | 356 Count | 220 Count | 0 VDC | 0 VDC |
| 1765569105 | 348 Count | 356 Count | 220 Count | 0 VDC | 0 VDC |
| 1765568204 | 347 Count | 356 Count | 220 Count | 0 VDC | 0 VDC |
| 1765567304 | 346 Count | 356 Count | 220 Count | 0 VDC | 0 VDC |
| 1765566403 | 342 Count | 353 Count | 217 Count | 0 VDC | 0 VDC |
| 1765565502 | 338 Count | 348 Count | 214 Count | 0 VDC | 0 VDC |
| 1765564602 | 333 Count | 344 Count | 210 Count | 0 VDC | 0 VDC |
| 1765563701 | 332 Count | 344 Count | 210 Count | 0 VDC | 0 VDC |
| 1765562800 | 329 Count | 342 Count | 208 Count | 0 VDC | 0 VDC |
| 1765561914 | 328 Count | 342 Count | 208 Count | 0 VDC | 0 VDC |
| 1765561014 | 326 Count | 341 Count | 207 Count | 0 VDC | 0 VDC |
| 1765560113 | 323 Count | 338 Count | 205 Count | 0 VDC | 0 VDC |
| 1765559212 | 320 Count | 336 Count | 203 Count | 0 VDC | 0 VDC |
| 1765558312 | 318 Count | 335 Count | 202 Count | 0 VDC | 0 VDC |
| 1765557411 | 316 Count | 334 Count | 201 Count | 0 VDC | 0 VDC |
| 1765556510 | 313 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765555610 | 312 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765554709 | 311 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765553808 | 310 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765552908 | 309 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765552007 | 308 Count | 332 Count | 199 Count | 0 VDC | 0 VDC |
| 1765551106 | 304 Count | 328 Count | 196 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)