This is the latest recevied telemetry packets stored in our database for station/object SN2DP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764995693 | 325 Count | 212 Count | 153 Count | 0 VDC | 0 VDC |
| 1764994804 | 322 Count | 209 Count | 151 Count | 0 VDC | 0 VDC |
| 1764993903 | 318 Count | 204 Count | 148 Count | 0 VDC | 0 VDC |
| 1764993003 | 315 Count | 201 Count | 146 Count | 0 VDC | 0 VDC |
| 1764992102 | 312 Count | 198 Count | 144 Count | 0 VDC | 0 VDC |
| 1764991202 | 309 Count | 196 Count | 142 Count | 0 VDC | 0 VDC |
| 1764990301 | 305 Count | 192 Count | 139 Count | 0 VDC | 0 VDC |
| 1764989400 | 301 Count | 188 Count | 136 Count | 0 VDC | 0 VDC |
| 1764988499 | 297 Count | 183 Count | 133 Count | 0 VDC | 0 VDC |
| 1764987599 | 293 Count | 179 Count | 130 Count | 0 VDC | 0 VDC |
| 1764986698 | 290 Count | 175 Count | 128 Count | 0 VDC | 0 VDC |
| 1764985798 | 286 Count | 172 Count | 125 Count | 0 VDC | 0 VDC |
| 1764984897 | 282 Count | 167 Count | 122 Count | 0 VDC | 0 VDC |
| 1764983996 | 278 Count | 164 Count | 119 Count | 0 VDC | 0 VDC |
| 1764983096 | 274 Count | 159 Count | 116 Count | 0 VDC | 0 VDC |
| 1764982195 | 272 Count | 158 Count | 115 Count | 0 VDC | 0 VDC |
| 1764981294 | 268 Count | 154 Count | 112 Count | 0 VDC | 0 VDC |
| 1764980394 | 264 Count | 151 Count | 109 Count | 0 VDC | 0 VDC |
| 1764979493 | 260 Count | 146 Count | 106 Count | 0 VDC | 0 VDC |
| 1764978592 | 256 Count | 143 Count | 103 Count | 0 VDC | 0 VDC |
| 1764977692 | 253 Count | 140 Count | 101 Count | 0 VDC | 0 VDC |
| 1764976791 | 249 Count | 136 Count | 98 Count | 0 VDC | 0 VDC |
| 1764975891 | 245 Count | 131 Count | 95 Count | 0 VDC | 0 VDC |
| 1764974990 | 241 Count | 128 Count | 92 Count | 0 VDC | 0 VDC |
| 1764974089 | 238 Count | 125 Count | 90 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)